The Hub

Hey folks! I picked up a neck relief gauge from Doug in one of the earlier batches, maybe the introductory run? Some of the small feet caps that thread onto the moving legs of the tool have cracked, broken, or become worn down. I contacted StewMac about purchasing replacement parts, but they don't sell subparts for the relief gauge and otherwise won't help me. They appear 3D printed, so I was wondering if anyone with the means to print s…

I’ve been building electric for a few years but decided to make an acoustic this time. I have some German spruce panels I was going to use for the top. While running it through my drum sander to dimension it, I noticed that both panels have matching 6-8” cracks so the original blank must’ve had a split pre resawing. Would I still have good results if I glue the panels and move on or should I buy a new top set? (I can’t return what I have…

hello looths - i'm building my first guitar. generally following (and enjoying) the gore/gilet books. after 3 tries, i've yet to get a crack free bend around the nose of a venetian cutaway with a mahogany side. i made a version of the fox bender - using clamps on hand for the waist and cutaway, and a pid temp controller (verified accuracy), and am using a stew mac blanket and three straps. the recipe for my last attempt was: sapelle (fo…

We hear a lot in LoothLand these days about 3D printing. I think it's an awesome use of that technology for what we all do. With my long history with AutoCad and 3D rendering in my previous life, I should pull the trigger on a 3D printer, but I'm just not ready yet AND I have no available space for one in my little shop or in my office right now. Yes, 3D printing is great, but sometimes, good ole regular printing can be a surprise frien…

I drew up and printed these F hole plugs for a customer a little while back, felt like showing them off here. The bottom diamond shaped piece has a M4 nut in it, and is super glued to the body of the plug at its two tips. An M4 screw threads into the nut through the counter-sunk hole in the top of the plug. The entire plug drops into the F hole, and then you can tighten the screw slightly to expand the plug so it clamps itself into plac…

Introducing Poseidon’s Horn! Coming in just shy of 18”, this tubular behemoth is the ultimate mess-free humidification device for closing up those pesky top and back cracks prior to repair. It’s dry to the touch and holds 1000ml of water! The days of finessing a Tupperware through a sound hole are over. Cheap and quick to make! Parts list (Supplies to easily make 10 of them) . Water beads - https://a.co/d/5v5Q2da . Braided sleeving - https:…

I am having a little trouble bending my first acoustic sides. The wood is a interlocked mahogany. I am hand bending on a temp controlled 2" curling iron. I have thicknessed the sides down to 1.9mm but still got some wrinkling and cracking trying to bend around the cutaway. I am trying to figure out how to improve this for the next attempt. I have read some conflicting information on how to do this though. Thus far my plan for the next a…