The Hub

hello looths - i'm building my first guitar. generally following (and enjoying) the gore/gilet books. after 3 tries, i've yet to get a crack free bend around the nose of a venetian cutaway with a mahogany side. i made a version of the fox bender - using clamps on hand for the waist and cutaway, and a pid temp controller (verified accuracy), and am using a stew mac blanket and three straps. the recipe for my last attempt was: sapelle (fo…

We hear a lot in LoothLand these days about 3D printing. I think it's an awesome use of that technology for what we all do. With my long history with AutoCad and 3D rendering in my previous life, I should pull the trigger on a 3D printer, but I'm just not ready yet AND I have no available space for one in my little shop or in my office right now. Yes, 3D printing is great, but sometimes, good ole regular printing can be a surprise frien…

I drew up and printed these F hole plugs for a customer a little while back, felt like showing them off here. The bottom diamond shaped piece has a M4 nut in it, and is super glued to the body of the plug at its two tips. An M4 screw threads into the nut through the counter-sunk hole in the top of the plug. The entire plug drops into the F hole, and then you can tighten the screw slightly to expand the plug so it clamps itself into plac…

I am having a little trouble bending my first acoustic sides. The wood is a interlocked mahogany. I am hand bending on a temp controlled 2" curling iron. I have thicknessed the sides down to 1.9mm but still got some wrinkling and cracking trying to bend around the cutaway. I am trying to figure out how to improve this for the next attempt. I have read some conflicting information on how to do this though. Thus far my plan for the next a…