The Hub

I have a 74' D-28 im working on, just curious what you guys do in terms of process steps. Right now, im setting the angle, without frets(I reinforced the square tube rod with carbon fiber and will need to refret once put back together.) Do you guys shoot for the straight edge hitting the top of the bridge with, or without frets? Im wondering if I should undershoot my bridge just a touch so that then I can fret and have a good saddle hei…

I cut the fret slots for a baritone guitar build today, so I thought I'd share my method for cutting fret slots, as I think it is a bit unusual. I radius and profile my fretboard before I cut the slots. I print out a paper layout of the fretboard, double-stick tape it to the radiused and profiled fretboard, line up the saw by eye to using red hatch marks on the printout, and saw the fret slots with a 3" circular saw that rides on…

I've only built a handful of necks and most of them have been roasted maple fretboards. This time around I am using a beautiful and incredibly stiff/hard piece of ebony. I am doing a light hammering in of the frets to get them seated and then using the hand-held vice clamps from Stewmac with the correct fretboard radius to push them down evenly the rest of the way. This process works just fine on roasted maple. It's just a softer wood t…

Hi, does anyone have experience with Stainless steel fret wire on acoustic guitars or more specific on classical guitars? Up to now I only used the traditional Nickel/Silver fret wire but recognised that after a few months they start to get mat or tarnish despite polishing them. I wonder if that is because of the origin (Producing Company) of the fret wire or due to the alloy? During my search for fret wire that is not Sintoms and also av…

Finishing up a new cutaway acoustic. I thought I had it right before finishing, but now that the finish is done and the neck is bolted on, a straight edge on the frets is 3/32" over the top of the bridge. Can I work with that, or do I need to either add a shim under the bridge, or just cut a new bridge? Any advice would be greatly appreciated... Paul in Chicago

We hear a lot in LoothLand these days about 3D printing. I think it's an awesome use of that technology for what we all do. With my long history with AutoCad and 3D rendering in my previous life, I should pull the trigger on a 3D printer, but I'm just not ready yet AND I have no available space for one in my little shop or in my office right now. Yes, 3D printing is great, but sometimes, good ole regular printing can be a surprise frien…