The Hub

The latest builds, repairs, and conversations from across Looth. Activity
Filters AND Search Cauls× In Business× In New Builds× Reset all
Private member DiscussionAcoustic Builds

Steam Box Idea... What's wrong with this idea?

Speaking of Trevor Gore... I've started using falcate bracing on my ukuleles and in making the braces, 3 strips of .0625" spruce are bent and then put in a bent lamination glue up rig using epoxy. Bending spruce is no fun on a hot pipe. It's slow, fussy, the fibers want to delaminate. I have been thinking about building a small dedicated steam box. Pulling all 3 of the strips out at once and bending them over a form with a metal back…

7 replies
7 replies
LikeShare
Ian Davlin
I tried it once for trying to bend mandolin sides. This was in 2006, back when the internet wasn't nearly as useful as it is today, so the attempt was pretty incomplete I think. If I remember correctl…
Private member DiscussionAcoustic Builds

more side bending

hello looths - i'm building my first guitar. generally following (and enjoying) the gore/gilet books. after 3 tries, i've yet to get a crack free bend around the nose of a venetian cutaway with a mahogany side. i made a version of the fox bender - using clamps on hand for the waist and cutaway, and a pid temp controller (verified accuracy), and am using a stew mac blanket and three straps. the recipe for my last attempt was: sapelle (fo…

6 replies
6 replies
LikeShare
Private member
hey @member - so i substantially followed your recommendations with another test piece of sapele: spray with supersoft about 5 min before going into bender, wet down craft paper, spritz side wit…