The Hub

Good morning to all - I have another skill building question - picked up another cheapo electric guitar to practice repairs on. I didn't see the big dent, but figured its an opportunity to practice another type of repair. big chunks of polyurethane finish are gone and the bit that's left has a hairline crack around the bottom. I'm thinking to use wood filler to fill in the missing chunks, and want to know if its best to remove the piec…

Hello all, got a problem in a telecaster I rewired that has me in a twist. The basics: friend has a 2001 US Standard telecaster (left handed not that it matters). He bought it used and says it was quiet initially. A few years back he grabbed the pickups out of it and moved them to a new tele body with a torrefied maple neck he preferred. Recently he upgraded the new build with a Lollar CC tele set, and asked me to reinstall the original…

I have repaired numerous top crack on this instrument built by a customer at a guitar building camp. The bridge was off and warped. That has been addressed. After gluing with hide glue and splining the crack these top two did not closed as much as I would have liked. The bigger is about 1/32 at the widest and the other about 1/64. The crack is tight at the bottom. If I can help it I would like to fill it rather than spline it as I have…

Hey! I have a friend who builds flat tops who wants to give stainless a try. I have done a handful of refrets and he was asking advice. He is using a compound radius from 14” to 20”. Jeskar sells the coils and they come in 10”. I have only done installs where the wire matches the board precisely. I bought pre cut pre radius bags for these re frets. Has anyone worked on a compound radius. Do you radius each fret on a bender or can you get…

Hello. I am interested in the luthiers opinions about using Osmo oil as a finish on acoustic guitars? Advantages vs disadvantages. I am a new builder with small home workshop, mostly using hand tools to build my first acoustic guitar, an OM pre war style. Thank you all.