This is a Kamouraska classical guitar, model 111, made in Canada in 1979. Internet information says it was made in La Patrie, Quebec, and later the line became La Patrie guitars. It looks like someone has been into this one before as the dovetail fit was poor, the gluing is very sloppy, and there are some rough chisel marks on the face of the heel. Note that if you drilled holes at the 13th fret you would miss the pocket by a few mm. Th…
Hello all, new member here. I've been working as a touring tech for 20 years and just noticed this section of the forum was empty, so I figured I'd give it a kick. Are there any topics\questions\ideas\etc that people would be interested in hearing about or discussing from a touring perspective? If so, drop a comment here and I'll see if I can address it or post any relevant photos\content. I'm leaving Wednesday for a month in Europe fol…
Hi Peter, I got into touring by meeting musicians through repair work. I started out in a cool little used and vintage shop in Portland called Old Town Music. I started doing a lot of repairs for Mode…
This Lys (made in Canada) is one of my personal guitars. I noticed the string ends are dissappearing into the bridge plate. I thought about buying the SM Bridge Saver when they were having a discount sale, but it's been out of stock. The tool set costs more than I paid for the guitar, but I figure I could use it in the future for other repairs. I'm wondering if anyone here has experience with this tool and if it's a better repair than p…
Most of the time I dam off the bridge plate on the inside of the guitar and then fill the bridge pin holes with 105 West Systems. Kind of a twofer because you can true up the bridge pin holes too.
Im trying my best to keep all of my parts to be made in the USA. With that, i have been having a difficult time finding potentiometers. Cts are made in Taiwan, alpha ate made in korea, bourns are in canada or Mexico. I found that missing link audio has American made parts but not pots. I emailed mojotone on their "push push" and i emailed the supplier tedss for any help in direction. Does anyone here know of any pots that are made in th…
1 reply
