Hey folks! I picked up a neck relief gauge from Doug in one of the earlier batches, maybe the introductory run? Some of the small feet caps that thread onto the moving legs of the tool have cracked, broken, or become worn down. I contacted StewMac about purchasing replacement parts, but they don't sell subparts for the relief gauge and otherwise won't help me. They appear 3D printed, so I was wondering if anyone with the means to print s…
PP3 replies
3 replies
LikeShare
PPrivate member
Ha! Mine took a freakish heicopter dive off the bench first day i had it and shattered the feet on each end ( flat style ) and i had hoped to sorce some replacements as well! Definitely looking to sou…
Ted Bergstrand BenchMuseArticleTools, Spaces, Robots, and WidgetsLite
I drew up and printed these F hole plugs for a customer a little while back, felt like showing them off here. The bottom diamond shaped piece has a M4 nut in it, and is super glued to the body of the plug at its two tips. An M4 screw threads into the nut through the counter-sunk hole in the top of the plug. The entire plug drops into the F hole, and then you can tighten the screw slightly to expand the plug so it clamps itself into plac…
Introducing Poseidon’s Horn! Coming in just shy of 18”, this tubular behemoth is the ultimate mess-free humidification device for closing up those pesky top and back cracks prior to repair. It’s dry to the touch and holds 1000ml of water! The days of finessing a Tupperware through a sound hole are over. Cheap and quick to make! Parts list (Supplies to easily make 10 of them) . Water beads - https://a.co/d/5v5Q2da . Braided sleeving - https:…
3 replies
