The Hub

Hi All, I wanted to check in with folks in the industry and ask for some advice. I have been on a building Hiatus for a number of years now (Hand Injury, Medical Issues). Things have gotten much better, and I am fully able and capable of building once again. The 2nd biggest hurdle I have had was a lack of opportunity for shop spaces to build. I now have a viable workspace and full use of my hands once again to build. The problem is that, o…

Hi Folks Newbie here so please bear with me. I have a lovely early 90's Yamaha LD-10E acoustic in for repair, I think all solid wood? made in Indonesia and a lovely sounding instrument, however the electrics are letting it down. The pre-amp has a PCB populated with SMD electrolytic caps. Many of these have leaked and destroyed the PCB pads underneath. Repairing the traces is nigh on impossible so it looks like I'll have to replace t…

Good morning to all - I have another skill building question - picked up another cheapo electric guitar to practice repairs on. I didn't see the big dent, but figured its an opportunity to practice another type of repair. big chunks of polyurethane finish are gone and the bit that's left has a hairline crack around the bottom. I'm thinking to use wood filler to fill in the missing chunks, and want to know if its best to remove the piec…

Hi Thought I'd say "hi". I've just joined the group. I'm Rob, I'm based in Yorkshire in North England. I'm mainly interested in elictric guitar and electric bass building and playing. I've built around 5-6 guitars/basses through 3d printing. I've two Prusa MK4's and been printing for around five years. The design and build of them is logged here https://www.basschat.co.uk/topic/485214-a-3d-printed-six-string/ And https://www.basschat.co.uk/t…