The Hub

good evening to all. This one showed up on the marketplace. I'm wondering if its too much to chew for me at this time. Is it a very difficult repair? Is it worthwhile pursuing? It's another $25 crash test dummy. Please, don't hold back. I can take it.

Hello! Im working on a repair for a cutsom build for a customer. Its a Dunable Yeti built in 2022. Anyway, all work was going fine till testing the rod... i discovered that the rod is working the opposite of how it should function on any other guitar. CCW is tightening (and no, no a dual action rod) Tightening this rod is adding relief. The guitar already had too much when disengaged. Trying to figure out how to approach this as this is a f…

Gah! I need help wiring Lollar Monoliths to coil split each pup at their own 2 way mini switch...client brought it in wired to a card ( based on rough drawing ) said he "tested it"....I had to clean up his wiring and soldering some...both pots, 3-way and 2-way switches are functioning but I get a weak signal when plugged in....what am I missing here? I redrew it ( nicer drawing ) with the black hots going to the 3-way ( swapped with gre…

Im Testing

Hey guys, Up until now I've always tried to blend any repairs into the surrounding area when it comes to finishing and avoid refinishing as much as possible. However, im yet to be fully satisfied with the results or hit the elusive "invisible repair" So my question is, for this headstock fix in the image, would you simplly refinish over the splines or consider refinishing the whole neck to avoid the blending battle? For what its worth, its…

Hey! I have been working on repairing a d-18 that had a large hole in the side. I glued in a backer, cleaned up the edges and after a few attempts got a patch glued in and leveled. I have been testing finish on some scrap but am getting lost in the woods. In my tests I am doing most of the color in the grain fill. Does anyone have tips on how to start touching this up? Thanks!

Hey all, I am really enjoying digging through the looth group. I have not yet watched all the ding kings vids or read all the amazing comments and articles here, but I've been appreciating some of the loothing for dollars stuff, seeing other people's intake sheets, discussions about dealing with customers, and it led me to this question: How do people deal with customer expectations, liability, and the inevitable accidents that can happ…

Hey, fellow Looths. I need a small favour… Short version: Go to https://statuesque-cocada-438199.netlify.app and listen and vote. It takes about a minute. Longer version: A friend’s son is studying music and audio production in college and is working on a project to test the covered versus uncovered humbucker question. He reached out to me for some help and I’m reaching out to you. He designed a solid experiment (even modding a guitar so…

I've been slowly chipping away at a rebind on a Gretsch streamliner with full on rotted binding. The repair was started by a luthier in KC that passed away a couple years ago and I inherited the repair after it sat for a few years. I've glued some binding back in place on martins with the Pacer canopy glue, and that has worked out fine in the past. I did a test w/ some new ABS from stewmac that I was going to use for rebinding the gr…

Hello, Help needed please! 🙏 It’s a Washburn g10v that I am trying to source parts for. The owner wants to do a full restore but we can’t move forward with the job as the trem is missing the micro tuner thumb nuts. The trem is a big old rare thing with 2001 on the edge of it. Please see picture for reference. (Taken from reditt, a common problem it looks like) I have one of the thumb nuts here and I think it’s a #no.5 -44 UNF thread. But it’s…