The Hub

Hey everyone, I wanted to do a bit of a follow up on a repair I'm doing. A customer brought in a Seagull acoustic guitar that had been dropped, causing the heel block to separate. I managed to get that glued back together with pleasing results, however I did need to take the neck off by removing the two bolts which thread into the heel block, and unglued the fretboard extension. All went well here, although I'm left with a situation whe…

i have a 2010 g&l asat bluesboy with a loose barrel jack. which is to say, when a cable is gently unplugged the jack comes out of the body. there is no nut on the inside of the control cavity to hold the jack in place - it looks like the wood itself is threaded. the jack barely protrudes into the control cavity so i don’t see an obviously good way to get a washer and nut on it. any ideas outside of enlarging the hole and installing a jac…

Hey! So I've got a customer who has dropped off with me one of the nastier headstock breaks I've seen in recent memory. There is excess glue of some sort (rock hard, clear) all inside the break, along with the threaded tracks of the screws. I'd usually just recommend a replacement neck in this case, but the customer is desperate to keep this neck as it holds some sentimental value to him. He's aware the repair will not be invisible, how…

Hello, Help needed please! 🙏 It’s a Washburn g10v that I am trying to source parts for. The owner wants to do a full restore but we can’t move forward with the job as the trem is missing the micro tuner thumb nuts. The trem is a big old rare thing with 2001 on the edge of it. Please see picture for reference. (Taken from reditt, a common problem it looks like) I have one of the thumb nuts here and I think it’s a #no.5 -44 UNF thread. But it’s…

Hi everyone. I have begun to incorporate more rattle can toner work in my touch up and cosmetic repairs. I have been using Mohawk toners so far and I am now trying out a different one of their toner products that is new to me. I use Mohawk Ultra Flo Ultra Bond for my clear coats. I thought it might be helpful to have a dedicated thread to the topic of rattle can toner as it pertains to touch up. Particularly headstock breaks that incorp…

I was able to get this one out using two Foam cutters and a little extra external heating of the heel with a heat gun on the low setting. Drilled at 15th fret as usual and got lucky, the holes intersected and scorched the dowels. I still had to wrestle it for about an hour... Converting to bolt-on is fun because the dowel holes will make aligning things easier. Once the dowels are removed, I'll just use two of the holes to refasten with…