The Hub

Hi friends, I was at a colleague's shop this morning. He’s a pretty well-known builder. A customer has asked for names (several… grandchildren, you know) being inlayed in abalone in a fingerboard and he’s feeling out of his depth for this task. I have volunteered to help find a colleague who'd be willing to do it. Anyone interested in doing this? Any recommendations for a talented colleague? Thanks friends.

https://reverb.com/news/take-a-photo-tour-of-the-1904-harmony-instrument-factory?

When using epoxy (either silvertip or epoxy), I try to sand back the epoxy on the surface and only leave it in the pores. I'll start the process with sanding to 320g or so then using an air compressor to blow out the pores. The challenge that I run into is opening new pores in the process. I use a block of wood and long strokes in an attempt to avoid uneven sanding. Ultimately I'll get a good pore fill but I tend to apply several coats…

Is there a way to see recent zoom meeting recordings or an index of links to the unlisted YT? Thanks.

Beginning Friday, August 31, I'm opening up the shop every Friday from 2:00–4:00 PM EST for an informal Zoom session. Whether you're: 🔹 Building with a Strings Micro Factory kit 🔹 Thinking about getting started 🔹 Looking for advice on a current project 🔹 Or just enjoy talking guitar building... You're welcome to drop in. No presentation. No agenda. Just open shop. Bring your questions, share what you're working on, or simply stop by and say…

Hello, I just received an unfinished, slotted but not fretted maple neck from Warmoth. I believe standard practice is to fret then finish but I’m curious if it might be better finish before fretting? I understand one would want to prevent finish from entering the slots. I’m and going to use tru oil and do a light finish, maybe three or four light coats. Thoughts for this beginner? Dave