The Hub

Few more prints up for grabs to anyone in the US who responds first. Fret sander and two screw holders with the gridfinity lobbed off so they are just free-standing.

So it seems that a drum sander would be very handy for many parts of a "build from scratch". There are a few out there that cost under $3000.00 that can handle wood up to 4" thick and are wide enough to sand a back or top after the halves have been joined. Jet JWD-22-44 open stand, 22"width Jet JWDS-2550 open stand, 25" width SuperMax 19-38 opend stand, 19" width SuperMas 25-50 closed stand, 25" width Questions: Any recomendations on the sa…

Good evening folks, lately I'm experiencing some sanding methods/mechanism frustration. Can't explain better than look like I'm regressing at doing it. The only thing changed in my building routine is that I'm currently using a CNC (I haven't used one for some years) for both bodies and necks. I have no problems with necks, but sanding bodies has become incredibly frustrating, specially around the edges. While I keep improving my c…

Hi all. Brand new member. I’ve been building a classical guitar via kit from LMI for a couple of years now. I keep putting it off but recently became motivated to get back to it. Unfortunately LMI is out of business so I now have no one to go to to ask questions. I’m at the stage where I’m putting the sides together in the form. I followed the dimensions for the form based on the plans as I measured them, but the sides overlap pretty ba…

I’ve been building electric for a few years but decided to make an acoustic this time. I have some German spruce panels I was going to use for the top. While running it through my drum sander to dimension it, I noticed that both panels have matching 6-8” cracks so the original blank must’ve had a split pre resawing. Would I still have good results if I glue the panels and move on or should I buy a new top set? (I can’t return what I have…

Santa heard I had a challenging year so he got me a 3d printer for Christmas. I’ve been printing like crazy, learning the machine. This has resulted in a bunch of tools that either don’t work for me, were attempts at mixing colors, or have very minor printing blemishes. Two lots up for grabs to anyone in the US who wants either. I’ll mail to you for free. First one to claim each gets it :) First lot has parametric nut and saddle sanders…

Here are some pictures that show the basic elements of a dome sander I made. Critical part is a lawn mower blade bearing/spindle. Cost $63. It is marked part # 607418 Blade spindle assembly. It has a tap for a .625-11 bolt on the side I put facing upward to bolt on the disk, and a shaft with a keyway on the bottom to attach to the big pulley. I used a 11” diameter and 2.5” diameter pulley combination. This gives just about the perf…

Like many of us, I work in a small space - a quarter basement with maybe 6 -1/2 feet of headroom. Sawdust is a problem. There’s no room for an extensive ductwork system or a blower setup. My shop tools (bandsaw, drill press, vertical belt sander, etc.) have a 1-1/2 inch connection for vacuum, but I have mostly been too lazy to use them. (note that I finally added a portable shop air cleaner with HEPA filters). When the most recent Wo…

Im going to be starting my 6th acoustic build soon. One issue I continue to have is low spots on the sides. I use an LMI bender with the spring steel slats that LMI provided (they are pretty stout). One observation, sometimes there is a bit of rebound in the sides as I take them out of the bender. I sort of force them into the mold to glue the neck and tail blocks. I’m wondering if that may be where the issue is occurring. After removing…