The Hub

Sadowsky use unique control plate screws which are much smaller than common plate screws. I believe the ones they use are: #3 × 3/8" Phillips Pan(domed) Head Black Oxide csk self tapping Sheet Metal Screw Type AB thread. Being in the UK, these are really hard to find, pretty much don’t exist here, so can anyone please help me or point me in the direction of a supplier? I’ve contacted Sadowsky direct with no response and also many of my main…

A visual dependency map for Autodesk Fusion. It turns complex Fusion designs into an interactive map of model logic, helping users understand how parameters, sketches, construction references, features, bodies, and other design elements relate to each other. Instead of digging through dense timelines, browser trees, and feature chains, Node Atlas gives users a readable graph of how a design is connected. It is built for designers, builder…

Modified Feed Spool to have two sandpaper slots: one for 400 grit or lower and one for 600 grit or higher. Modified Take Up Spool slots to hold 600 grit and higher papers without slipping. Updated files are available in .zip download. https://dev2.loothgroup.com/loothprint/fretsander/ Images

Doug Proper designed a sanding jig that supports variable concave and convex curves, described in the following Loothgroup article: https://loothgroup.com/post-imgcap/the-variable-radius-sander/ I built one and am impressed with how it facilitates preparing bridges, braces and also allows tracing any radius using the chord formula. I made a rough measured drawing and assembly guide to share, with Doug's blessing. First step, ma…

I had a vintage Gretsch semi hollow come through the shop this week and it's left me with some questions. First off identifying the instrument's model has been a trick so far. The only information I can find is that is was likely built in and around the early 50's Second, it's in need of a neck reset. I'm not particularly well versed in resets for hollow and semi hollow guitars, especially one of this age and design. I'm very curious…