The Hub

Would anyone know here I can buy a CAD code for the making of an OM mould?

Back at tinkering with the new Isoparametric Curve tool in Fusion. Scroll down to PICTURES LETS GO! If you want to skip this little walk through Autodesk Fusion memory lane, clearing up some of the UI conFusion. Why something so seemingly basic, is just being added today. 2009- Autodesk Inventor, hybrid modelling experiment, parametric and direct CAD in one hybrid system. 2011- Autodesk acquires T Splines Inc. an organic modeller still in…

December Acoustic Classes Announced!

I've seen the Elevate Luthierie jig, and it seems simple enough. One thing I don't like about their explanation video is the handwaving around "set the joint length where you want it"...feels like even with the jig, you have to do too much measuring to make it fit exactly (or within the tolerance you want) Given I can model well enough in Fusion and have a 3D printer, feels like a challenge to take on! As far as I can see, the jig is just…

This is a repost from the main feed so it is in the correct forum. The recent F5 CAD modeling video inspired me to take a stab at it. I use Fusion 360 and have already completed a full A5 model that I’m using to prepare a lot of parts for my CNC. The F5 top seems intimidating. I focused on modeling the scroll alone for now. I didn’t pay attention to following a plan, or having perfect dimensions, or getting the curves to look perfect th…

Should a CNC be able to cut a perfect looking circle? I'm trying to make solid wood rosette rings. I made the tool path a profile cut. The top and bottom of both Y positions come out uneven in width than the rest of the ring. I've tried slowing down the feed and plunge rate, but it doesn't seem to make any difference. I have an old second generation Nextwave CNC shark and use Aspire for CAD and CAM. Linear cuts seem to be accurat…

Anyone use a 3D scanner to make models for printing, or CNC? I've noticed a number of inexpensive scanners on the market that appear to be an able to scan with fine detail and accuracy. I've wondered if they could be used to scan a guitar neck, or arch top mandolin plate to then cut on a CNC after tweaking in a CAD program.

Hello! Any FreeCAD users? I've trialing software version 0.21.2 for the last few months with success. Both CAD and CAM are more than functional. There are some quirks in the CAD side that I found that could be worked through, mainly in constraints. These quirks remind me of the "odd logic" that had to be used in older CAD software. Just starting conversation.

Learning CAD no longer needs to make you sad!

Just finished up with a great group for my Online RhinoCAM course, now the cycle begins again! Starting next week, so don't sleep!

I'm the proud new owner of a "new to me" Fireball Meteor CNC machine. It feels really odd to have a computer in the shop but I guess I need to get used to that. Fortunately for me, I am well versed in CAD, unfortunately not so much on the CAM side of things. My 3 kids are all experts and are steepening the learning curve dramatically, this would be overwhelming if they weren't helping. So far I'm using the Fusion 360 personal use versio…