The Hub

Doug Proper designed a sanding jig that supports variable concave and convex curves, described in the following Loothgroup article: https://loothgroup.com/post-imgcap/the-variable-radius-sander/ I built one and am impressed with how it facilitates preparing bridges, braces and also allows tracing any radius using the chord formula. I made a rough measured drawing and assembly guide to share, with Doug's blessing. First step, ma…

YouTuber has been developing this for a while. I thought I would share it here. https://m.youtube.com/watch?v=X6RLN-sLtVA&pp=ygUQdGhlIG5leHQgcHJvamVjdA%3D%3D

Hello! First time poster, long time lurker... I thought you guys might get a kick out of this. I got fed up of having to re-mount my workbench lid after pulling it off a particularly bumpy/cold/hot/anything truck ride and began searching for a mounting system that would hold everything up when the lid was open, but also crucially not fall off when it was closed after the show. I happened upon multiboard, which looked like it could do the…

Hi Thought I'd say "hi". I've just joined the group. I'm Rob, I'm based in Yorkshire in North England. I'm mainly interested in elictric guitar and electric bass building and playing. I've built around 5-6 guitars/basses through 3d printing. I've two Prusa MK4's and been printing for around five years. The design and build of them is logged here https://www.basschat.co.uk/topic/485214-a-3d-printed-six-string/ And https://www.basschat.co.uk/t…

I have been adoring my new P1S But last week it started getting clogged or something. It would get a few mm up and then no more extrusion. On these prints I was using old off brand filament. I cleared the clog a few times and it kept happening. I bought some new Bambu filament and tried again today with the nozzle unclogged. And one print finished but doesn’t look so great on top. And the second print didn’t “clog” but it is spaghetti. I…

I drew up and printed these F hole plugs for a customer a little while back, felt like showing them off here. The bottom diamond shaped piece has a M4 nut in it, and is super glued to the body of the plug at its two tips. An M4 screw threads into the nut through the counter-sunk hole in the top of the plug. The entire plug drops into the F hole, and then you can tighten the screw slightly to expand the plug so it clamps itself into plac…

Just finished up with a great group for my Online RhinoCAM course, now the cycle begins again! Starting next week, so don't sleep!