The Hub

Found this, will print later, saves a little design time. https://makerworld.com/models/1835300?appSharePlatform=copy Having made 3D printed Vacuum fixtures for CNC previously, I’d recommend printing as close to 100% theoretical density as possible, as any voids can and likely will lead to suction loss. Finer dimensional stability and layer adhesion with something with Glass Fibres will probably help. I’d avoid materials with additives th…

Here are some pictures that show the basic elements of a dome sander I made. Critical part is a lawn mower blade bearing/spindle. Cost $63. It is marked part # 607418 Blade spindle assembly. It has a tap for a .625-11 bolt on the side I put facing upward to bolt on the disk, and a shaft with a keyway on the bottom to attach to the big pulley. I used a 11” diameter and 2.5” diameter pulley combination. This gives just about the perf…

Like many of us, I work in a small space - a quarter basement with maybe 6 -1/2 feet of headroom. Sawdust is a problem. There’s no room for an extensive ductwork system or a blower setup. My shop tools (bandsaw, drill press, vertical belt sander, etc.) have a 1-1/2 inch connection for vacuum, but I have mostly been too lazy to use them. (note that I finally added a portable shop air cleaner with HEPA filters). When the most recent Wo…

Anyone have a suggestion for a do everything vacuum pump? I'd like something that could laminate sides, brace tops, laminate double tops, etc etc. I know @member@member has a cool cheap one. I'm not sure if that's powerful enough to do all building tasks? If it is, that's cool.

I tend to watch the recordings in my free time when they are posted to the group. So it is important to me that recordings make it to the website. Theres a few i see on the patreon that i dont see on the website: Bashkin pore filling 3d modeling showdown Wood and finish repair I was also wondering if there was ever a video of the actual vacuum bagging and big reveal of the carbon headstock repair. I know there was the setup video which was…

Does anyone have experience with this drill press vacuum attachment? Seems like it could be handy for hogging out semi-hollow bodies. https://www.infinitytools.com/drillnado-drill-press-dust-collection-system-1?utm_source=remarkety&utm_medium=email&utm_campaign=10%2F01%20Sun%20Send%202%3A%20DPT-200&utm_content=&_rmId=vVJ1A6yoQxSegYPLMj3GHGdQdl3dDbtk3