The Hub

Hi guys. I have a cnc machine but don’t know how to draw stuff. Can anyone share a file for a 15 and 30 foot radius dish please?

I need to make a router template for a rear access control cavity in the PRS style of 1 vol +1 tone +1 switch? Placement of pot and switch holes aren't important, just the contours of the cavity so I can print a routing template. Does anyone have a file? Thanks! Justin

Are any you using an ultra sonic cleaner to clean metal hardware? If you are, what brand/model are you using and do you find it useful?

https://makerworld.com/en/models/209223?fbclid=IwAR1vw4hc0fpnpuwhTm1UrKvVJlBe-F45tkpND5qoezmPvUoFJuZXoR_A2ww#profileId-229135

I'm wondering if people have advise on ways to be productive when having to work in multiple locations. Particularly curious about tool organization and portability strategies. I share one shop about 45 minutes from home, but also do some work from home. Mostly repair and setup stuff at home and building/more involved repairs at the shop. Some tools and supplies are simple enough to have multiples of, but for others it gets really expens…

Hey folks- just picked this file out of a closing shop. Anyone know what it was intended for? It’s diamond coated, tapered on all sides. Thanks

What is going on here? Ender 3 neo. Have tried multiple filaments. The extruder is in good condition. It is spinning but filament isn’t being pushed through. Just put a fresh nozzle on. Increased tension on the extruder.

Currently considering getting a Phrozen Sonic Mighty for doing some small parts manufacture and was wondering if any of y'all looths are doing any resin printing currently. I'm looking for any tips, tricks, or advice before jumping in. Are there better printers i should be considering? Is there anything I should just full on avoid? How have y'alls resin printing experiences been?

This is a rehash of the amazing Loothprint that Mike (@member@member@member) shared to the group (Surface Inspection Light – The Looth Group). I don't have a 3D printer so had to take a low(er) tech approach. The pics should be self explanatory. I have linked to a DXF and CRV (Vectric VCarve) file in case it helps. I do most simple tooling in Aspire as I can move more quickly there than in Fusion. Components needed: .75" Baltic birch ply Flash…

@member@member I was going to print your miter box but it appears like it's cut all the way through (the saw slots go all the way through). Am I missing something? In the pictures it looks like the three sections are connected. But this is what it looks like in my slicer (from the bottom).

I completed a partial 3D scan of a Les Pauls top with a goal of making a mated routing template for a p-90. This is my first time working with mesh in Fusion, and I was hoping that the hive mind could point me in the right direction! STL file is below in the comments if you want to play around with the scan! Thanks Ian!

I'll send you a sample or the file. let me know.

I just replaced my old knives with a helical cutterhead in a Jet 15" planer and am having issues with a test piece feeding through. Has anyone experienced this before? Have any idea what's causing it?