The Hub

I had a Flashforge Adventurer 5m pro and liked it but it suddenly stopped connecting to WiFi. Customer support was super frustrating and I returned it. But i did like it when it worked, aside from wishing it had a larger print bed. Any recommendations on what I should look at in the <$400 range? I’ve been reading and googling but have yet to find any advice that seems to hit the spot. Thank you!

Hi all. I'm in the process of working with a landlord to customize a space for my growing repair and building business. The space is approximately 800 square feet and broken into a major space (around 400 square feet), and 2nd large space (around 300 square feet) that I'm thinking of as a machine/sawdust room, and 2 smaller areas that I'm considering as a spray booth and a wood/guitar storage closet. I'd love to hear about lessons learn…

Does anyone have a STL for a routing template that will sit square on a les paul body? I need to cut a P90 hole into a middle position, and it would be nice to use the router, rather than chiseling the edges...

Just received these sandpaper rolls from Red Label. 4.5"x60' cloth backed aluminum oxide. Killer deal at $15 a roll (about 30% of normal price). Quality is excellent. Various grits available. Don't know how long the deal lasts. https://www.redlabelabrasives.com/products/4-1-2-inch-x-20-yd-roll-cloth-backing-aluminum-oxide?utm_source=Customers&utm_medium=email&utm_campaign=1%2F6%2F26%20-%20Bulk%20Surplus%20Reminder%20%28Customers%29%…

Dear looth community/colleagues around the world, During 2023/24 I have developed a digital gauge to measure so-called longitudinal twist of (bass) guitar necks: the LTwist® gauge. Just to be clear, this is about the "cork screw" type of deviation along the length of a neck, not the bow of a neck. I think there is no need to explain how a too severe neck twist can make it difficult or even impossible to set up a stringed instrument (guita…

I drew up and printed these F hole plugs for a customer a little while back, felt like showing them off here. The bottom diamond shaped piece has a M4 nut in it, and is super glued to the body of the plug at its two tips. An M4 screw threads into the nut through the counter-sunk hole in the top of the plug. The entire plug drops into the F hole, and then you can tighten the screw slightly to expand the plug so it clamps itself into plac…

I used to run a cnc punch press at a machine shop. It was a Trumpf. For some reason the brand just showed up on my Instagram and I checked it out. Apparently they make printers that print metal powder. @member are you ready for the next level? Might be interesting for custom hardware. https://www.trumpf.com/en_INT/products/machines-systems/additive-production-systems/truprint-1000/