The Hub

Like many of us, I work in a small space - a quarter basement with maybe 6 -1/2 feet of headroom. Sawdust is a problem. There’s no room for an extensive ductwork system or a blower setup. My shop tools (bandsaw, drill press, vertical belt sander, etc.) have a 1-1/2 inch connection for vacuum, but I have mostly been too lazy to use them. (note that I finally added a portable shop air cleaner with HEPA filters). When the most recent Wo…

Hey! For those who use the foam cutters, which ones are you buying? They have a "luthier" set with a cranked up price and a variac attached. I have heard folks say the cutters burn up after a while so is it worth buying the more expensive ones? Thanks!

I'm wondering if people have advise on ways to be productive when having to work in multiple locations. Particularly curious about tool organization and portability strategies. I share one shop about 45 minutes from home, but also do some work from home. Mostly repair and setup stuff at home and building/more involved repairs at the shop. Some tools and supplies are simple enough to have multiples of, but for others it gets really expens…

Have you ever had a really stubborn bridge plate to remove? I had one not too long ago that seemed to resist wetting with a damp cloth, and subsequently all the heat I could get from my silicone heating pads. After much effort I got about 80% of it out cleanly. The remaining 20% required hours of work with a finger plane. That experience made me think about the Brown's Guitar Factory bridge plate removal tool I had purchased years ago,…