The Hub

I don’t have CNC capabilities so I could not duplicate Dave Slimmer’s version ( https://loothgroup.com/loothprint/bridge-clamping-cauls/). Got a 12x18x1/2 inch HDPE cutting board on Amazon for under $10 (https://www.amazon.com/dp/B001D3LQVA), drilled a row of 1/2 holes about 5/16” deep with a Forstner, cut the HDPE into 5 sided chunks so I could orient by touch, and free handed the brace grooves on the band saw. The clamp swivel pads are 1…

Speaking of Trevor Gore... I've started using falcate bracing on my ukuleles and in making the braces, 3 strips of .0625" spruce are bent and then put in a bent lamination glue up rig using epoxy. Bending spruce is no fun on a hot pipe. It's slow, fussy, the fibers want to delaminate. I have been thinking about building a small dedicated steam box. Pulling all 3 of the strips out at once and bending them over a form with a metal back…

So, I made a modular clamp based on the split clamp idea. Started on a prototype about two months ago and finished it. What I was aiming for was a clamp that I could use on the BOTTOM of acoustic guitars as well as tops to clamp cracks, cleats, braces, patches etc. Especially a clamp that would access small openings like "F" holes, small sound holes etc. Essentially a way to get a clamp to areas not accessible to jacks, wedges etc.,…