The Hub

Hey everyone, I was showing this to James Roadman on the Loothalong, and I thought I’d share it here with anyone who might find it helpful. I was installing an Anthem in a GS Mini, and I couldn’t get the microphone to fit without hitting the ballends of the strings. I had thought about placing the mic on the other side of the pins, but then I decided to use a scalpel and a small file to cut some chamfers into the corners of the mic housi…

I have a Taylor Acoustic in for a setup and I had a couple of questions: 1. My main one is how you would go about gluing the label back on? I'm probably overthinking it but I'm curious if there's a universally recognized way of doing this? 2. I have some very minor finish damage which I'm not planning on touching, but I am curious how one would go about repairing it. Would this be a case of drop filling lacquer? What would be the…

This repair came into the shop on Thursday. The crack appears to go most of the way through the neck but hasn't opened up at all. What is the current best practice to address cracks like this? Shout out to @member as the resident Taylor expert. Thanks in advance for your help.

So this 310 came into the shop and had a pretty gnarly crack that splinters some toward the lower left bout. Going to do a crack repair with the TJ Thompson crack corrector and some hide glue. The issue I'm inquiring about is the finish is delaminating around the area. I'm curious as to what type of finish it is. Seems a bit flexible and spongy to be a nitro alone. There's shards of finish missing, and dirt has found its way underneath…