The Hub

This Lys (made in Canada) is one of my personal guitars. I noticed the string ends are dissappearing into the bridge plate. I thought about buying the SM Bridge Saver when they were having a discount sale, but it's been out of stock. The tool set costs more than I paid for the guitar, but I figure I could use it in the future for other repairs. I'm wondering if anyone here has experience with this tool and if it's a better repair than p…

I've got a 1970s Harmony Stella parlor guitar and the top seems to be buckling. There is (at least one) loose brace. I assume that there's something going on with the neck block, and that just re-gluing the brace isn't going to fix this. I have no experience removing necks or doing neck resets. This is my own guitar, and I bought it as a learning tool, so I am comfortable using it as such. So... Is my assessment about the neck block likel…

If you're like me, you've acquired lots of small luthier tools over the years from StewMac and other vendors. Having a place to store them has always been a problem for me. I stopped drinking soft drinks years ago because they're bad and I recently found out I'm diabetic so they're definitely off the menu. I swapped out soft drinks for water and Crystal Light a long time ago. In our throw away culture, single use plastics are a huge pro…

Hey everyone, I could use some advice as far as the fretting process is concerned. I’ve been doing guitar repair since around 2008, I opened my business doing guitar repair in September of 2021, and I’ve always felt that fretwork has been the most challenging part of this job. I’m getting to the point now where I finally feel like I’m getting the hang of it, but I’m not where I want to be yet. I should mention that I use the Erlewine…

I'm wondering if people have advise on ways to be productive when having to work in multiple locations. Particularly curious about tool organization and portability strategies. I share one shop about 45 minutes from home, but also do some work from home. Mostly repair and setup stuff at home and building/more involved repairs at the shop. Some tools and supplies are simple enough to have multiples of, but for others it gets really expens…

Hey all. I need some advice. When getting started in your career, or even after you're established, what side jobs do you do to help make it all work? Quick background for me. Based in Austin, TX. I've been doing guitar repair evenings/weekends for 14 years now. I've been working an office day job this whole time. Day job pays me $30/hour. As a looth, I charge $70. I can make the equivelent of one day job paycheck loothing in the evening…

Two pieces of maple, each of which were measured beforehand and then cut up and epoxied back together to keep things as consistent as possible. Even the orientation of the grain was the same to avoid any impact of vertical vs horizontal grain lines. The plain maple had one layer of 300gsm 12k unidirectional carbon fibre between each piece, the flame maple had two per lamination, which may be why it sees a smaller gain afterwards? Lots m…

Hello looths worldwide ! 🌍 I just moved into a bigger space, called "Comme un Établi" here in Rennes, France (https://www.commeunetabli.fr/). It's a pretty cool space, with shared tools and knowledge, in which I have 13 square meters dedicated solely to my loothing business. People here have different jobs (leather work, wood work, metal work, book repair, furniture repair, etc.), and are used to offer workshops to people. I'm looking for…