The Hub

Side bender machine in great condition. Includes spring steel, heating blankets, and thermocouple. No bending forms included, just the machine itself. Asking $600 for local pickup in Chicago area.

A client has asked me to build an acoustic guitar using crelicam ebony for the back and sides that he is getting form Stewmac. I have heard it's challenging to bend, and this will be an OM so the waist is pretty tight. Any thoughts or suggestions for bending these sides? I use a homemade bending machine modelled after LMI's latest design (may they rest in peace) and I have had good success bending rosewood, walnut, mahogany, and pau fer…

I drew up and printed these F hole plugs for a customer a little while back, felt like showing them off here. The bottom diamond shaped piece has a M4 nut in it, and is super glued to the body of the plug at its two tips. An M4 screw threads into the nut through the counter-sunk hole in the top of the plug. The entire plug drops into the F hole, and then you can tighten the screw slightly to expand the plug so it clamps itself into plac…

Hey everyone, I could use some advice as far as the fretting process is concerned. I’ve been doing guitar repair since around 2008, I opened my business doing guitar repair in September of 2021, and I’ve always felt that fretwork has been the most challenging part of this job. I’m getting to the point now where I finally feel like I’m getting the hang of it, but I’m not where I want to be yet. I should mention that I use the Erlewine…

I have some acoustic building templates for anyone that's interested. I bought these from Allied Lutherie before I got into CNC work. Now that I'm drawing my own stuff I don't really use these at all. Maybe someone would find them useful? Includes: 1 - L-00 template for outside form (1/2" mdf) 1 - L-00 template for side bending form (1/2" mdf) 1- L-00 body profile template (1/8" polycarbonate) 1 - J-45 template for outside form 1 - J-45 temp…

I am having a little trouble bending my first acoustic sides. The wood is a interlocked mahogany. I am hand bending on a temp controlled 2" curling iron. I have thicknessed the sides down to 1.9mm but still got some wrinkling and cracking trying to bend around the cutaway. I am trying to figure out how to improve this for the next attempt. I have read some conflicting information on how to do this though. Thus far my plan for the next a…

Hallo, I have an old archtop (plywood) that needed a refret. There is no trussrod. I talked to the owner, he knows that my work will maybe/eventually more expensive than the value of the guitar. But it was only after leveling the fretboard that I realized that the fret slots are completely off. I talked to the customer again, and we agreed, that I should put a new fretboard on the guitar. I have one, that I took of an old guitar, and reuse…

So I've ended up with a 1961 Harmony H54 for free. The neck has about .022" of relief without strings on it. The fretboard was taken off long ago. I got it like that, it was just stuck on with double sided tape. I have no clue why it was taken off other than maybe someone wanted to fix the excessive relief and changed their mind. It looks like the original steel reinforcement rod was never actually glued in. It seems like it was bent a…

I have a new client with 100+ shredder type guitars. He gave me a couple of the easier ones to work on. The first is an ESP which fretted out with bends up above the 12th fret. I thought it was just the 2/64th" low action, but the last two frets seemed really high. I suspected there was a shim in the pocket, and yeah, there was. The bottom of the neck heel is deformed where the shim was. The shaded/dirty area at the bottom edge. Not den…