I've got this Telecaster pickup (1969). The pickup works. Is it possible to flatten the top without gluing it down to the windings? Clamping lightly with a caul slotted for the magnets seats it nicely but I'm not sure how to make it stay there. Any experience with this? Suggestions?
PP2 replies
2 replies
LikeShare
PPrivate member
If it's working, you don't really want to. Plenty of people manage to cla.p down the ends and hit the pole pieces with super glue. And that can work. You run the risk of breaking the internal coil wir…
Hi dear luthiers, I want to build a copy of a vintage Gibson acoustic. Therefore I need to draw a good plan. Do you have good tips of how to measure the guitar, especially the interieur like braces or the back+side thickness? Do you have a certain schedule, that you follow? For the position of the braces I will use magnets. But the height, thickness and profile, how do you adress this? Thanks a lot in advance!
I have a Rickenbacker 620 on my bench; I have repaired the neck pickup (it came loose, uninstalled) and I am stumped with where the wire should dip into the control cavity. There is no hole in the route for the magnets, I assume it runs under the floating pickguard, but I dont see any relief or path under the main control panel. This has the toaster style pickups and dates to the 50's. Thanks in advance.
Anyone got any good tips for regluing a brace in an acoustasonic strat? I can get in there with a magnet and little violin clamp, but can't get effective pressure all the way down with those. Does someone make small scissor jacks? The gap between the top and back is 1.25 inches, so I can't fit even our cut-down normal one. I'd like something a little more elegant than wedging short sticks between the brace and back, but will use th…
