The Hub

Great Tool. Great Benchy. Testing Threads, Sliding Dovetails, Overhangs, and it’s actually useful instead of that boat.. so testing wear resistance too. igus iglidur I151 Thanks for the model @member

Hi guys, here’s something I’ve been working on: a fully automated, programmable pickup winder. The software is still in alpha testing and there’s still a lot to design, but this is what it looks like so far! Images

Hey guys, Up until now I've always tried to blend any repairs into the surrounding area when it comes to finishing and avoid refinishing as much as possible. However, im yet to be fully satisfied with the results or hit the elusive "invisible repair" So my question is, for this headstock fix in the image, would you simplly refinish over the splines or consider refinishing the whole neck to avoid the blending battle? For what its worth, its…

Just wondering, anyone doing Ken Parker finishing on an acoustic with the bridge glued on? I've been using the finish for a while but I'd like to start glueing the bridge on before I finish so I can acoustic test everything in its final state. I can't see a reason why I couldn't wipe the epoxy and oil up into the bridge joint and then remove it by rubbing but I was wondering if anyone has done it already. It would mean finishing the…

In Michael Baskin's on-line video, he uses a frequency test of a guitar in the white to determine whether to thin the lower bout before finishing. The guitar in the video has a bridge attached. I'm wondering if this is the final bridge or something temporary. If the latter, how do the results compare to the final frequency analysis? I've used a bolt-on bridge to do the same, but don't have enough data points to draw a firm conclusion…

For my current mandolin build, I set out to answer 2 questions: 1. Whether to use physical deflection or frequency analysis to measure stiffness, and 2. How well can I measure wood quality in rough sawn form? (T. Gore says it needs to be planed smooth and rectangular for frequency analysis.) I have 4 different topwood species available for my current build: California Sitka, Englemann, Lutz, and Coastal Redwood. The billets range from 37…

Hello All! My first post and I'm very happy to be here and share the highs and lows of this pony ride. After years of bending sides on a hot pipe or bending machines belonging to 'other people', I finally built myself a bending machine. Functionally it is great, but the result on some test material was far from great. See pictures attached. What you see here is a doug fir 'test side' that certainly came out guitar shaped, but oh my, what…

I dyed an East Indian Rosewood bridge black to match the Blackwood fretboard before gluing it on*. The bridge is now glued to the top. What are some ways to "fix" that dye into the wood. I'm not crazy about TruOil - up to 40% mystery oil..... *I did a sample on rosewood with 4 different "dyes" and they were all stable, would not rub off with paper towel, naptha or mineral spirt. I went with the TransTInt. I did not however test with…

Hey! I have been working on repairing a d-18 that had a large hole in the side. I glued in a backer, cleaned up the edges and after a few attempts got a patch glued in and leveled. I have been testing finish on some scrap but am getting lost in the woods. In my tests I am doing most of the color in the grain fill. Does anyone have tips on how to start touching this up? Thanks!

Hey all, I am really enjoying digging through the looth group. I have not yet watched all the ding kings vids or read all the amazing comments and articles here, but I've been appreciating some of the loothing for dollars stuff, seeing other people's intake sheets, discussions about dealing with customers, and it led me to this question: How do people deal with customer expectations, liability, and the inevitable accidents that can happ…