The Hub

I'm working on a Japanese Strat with a Kahler tremolo I've never seen before. I'm trying to find where the adjustment point for the saddle intonation is. The back side has openings for each string for... something. It's not an allen wrench, and it's not a screwdriver of any kind. The threads are 6/32" and when I tighten a screw into the holes, nothing happens. I haven't been able to find anything on google about this particular bridge.…

I'm working on a repair to a Washburn EA50 headstock. Someone previously tried to repair this with a dowel, which likely worked until it was strung up. I've routed a slot and created a biscuit, and built a jig to hold both parts of the headstock in the same plane and clamp everything tight (some cauls and threaded blocks of maple with 1/4-20 machine screws). The plan is to use System 3 gel epoxy (a'la Beau Hannum) and then add a coup…

Ian - that was some really interesting stuff he presented today. I plunked down the $ for his book and will be picking up the recommended USB microphone- oh, some oregano too. So here’s the suggestion: maybe every broadcast/recorded program should have a thread for q and a and discussion. I assume you would want to start a new section an populate it with all of the programs in advance - yeah, we love making busy work for you. And I am rea…

I’ve come across several Takamine lawsuit guitars needing neck resets. These lawsuit guitars are from the 1980’s and are basically a copy of a Martin. Pictured below is a 12-string Takamine that came in for a neck reset. After several hours using heat rods at the 15th fret all of the the wooden dowels would not release. My solution was to take a putty knife with a sharpened edge and using a hammer slice the dowels at the joint. As you c…