The Hub

So, I've seen people having to deal with crappy binding glue on newer Martin's. I have a D35 at 50 (2015) and the purfling has separated from the guitar body all the way around both the top and bottom of the guitar due to heat. Not only that but the binding has separated from the purfling in spots. The glue is still tacky and it's almost like a thick stain as it has impregnated the top and sides, making it impossible to completely rem…

The back of the neck pocket is under the 15th fret slot. Holes are drilled 3/8" from the outside edge of the fret board. Check out Ted Wordford's video at for extensive work he did on a '63 Sorrento.

Hello! First time poster, long time lurker... I thought you guys might get a kick out of this. I got fed up of having to re-mount my workbench lid after pulling it off a particularly bumpy/cold/hot/anything truck ride and began searching for a mounting system that would hold everything up when the lid was open, but also crucially not fall off when it was closed after the show. I happened upon multiboard, which looked like it could do the…

In this video, I show an alternative way to remove humbucker covers with no soldering required. Check it out and enjoy!

Hey folks, I put together a video showing how I measure the long, cross, and transverse frequencies on guitar top plates before thicknessing, following the Gore method. I also walk through using the calculator I built (based on Trevor Gore’s equations) to get target thickness and track density / young's modulus. Fair warning: the video’s a bit YouTube-y in tone thumbnail faces, a little energy for the algorithm, but the content is genuine…

Hey all. I have an '82 Ibanez Roadster bass on the bench. The bridge pickup is their Super J4. My customer wants to tame the noise as much as possible. I've shielded the cavities to minimal effect so I'm thinking of wax potting it but before I do I just want to ask your opinions. The bobbin is quite thin and I don't know what kind of material it's made from. Having watched the Kent Armstrong video where he mentions that old DiMarzios sh…

I've seen the Elevate Luthierie jig, and it seems simple enough. One thing I don't like about their explanation video is the handwaving around "set the joint length where you want it"...feels like even with the jig, you have to do too much measuring to make it fit exactly (or within the tolerance you want) Given I can model well enough in Fusion and have a 3D printer, feels like a challenge to take on! As far as I can see, the jig is just…

This is a repost from the main feed so it is in the correct forum. The recent F5 CAD modeling video inspired me to take a stab at it. I use Fusion 360 and have already completed a full A5 model that I’m using to prepare a lot of parts for my CNC. The F5 top seems intimidating. I focused on modeling the scroll alone for now. I didn’t pay attention to following a plan, or having perfect dimensions, or getting the curves to look perfect th…

New YouTube video documenting carbon fiber headstock repair and graining replication

Heres a link to a youtube video I just quickly put up unedited of my latest build!

[ The majority of my learning has come from the Blues Creek Guitars YouTube videos and reading books (i.e. no mentor/formal training). ] When I checked the centerline (picture with ruler is pre-adjustment), I was slightly off the perpendicular. So I removed a tiny amount from the cheek (side with the purple tape), getting that nice and flush and centerline where I want it. But now I have a .035" gap on the other side. What should I check…

This is an update to a video that I put out about 6 months ago where I gave an overview of a Squier Debut Series Stratocaster. Since then, I've been using this guitar as my main shop guitar, and this new video covers how its held up, and what upgrades I did to it since I got it. The previous video I did on this topic has been the most successful one on my YouTube channel so far, and I'm trying to regularly make videos showing some of wh…

This video is just a quick example of how simple the Jaws 2 is for setting frets. We did not include shots of using glue to keep the fret down. This guitar was donated for teaching purposes…We will be pulling all the frets and performing a full refret in a later video

There are two new sub forums in New Builds and Repair and Restoration called “share your content”. Got a new youtube video ? Share it there. Got a new Instagram Reel ? Share it there. Did you just cut a killer new miter and just want to share it ? Share it there. Anything you want to share that doesn’t involve a question, share it there. Speaking of which, I should probably share this there.

There are two new sub forums in New Builds and Repair and Restoration called "share your content". Got a new youtube video ? Share it there. Got a new Instagram Reel ? Share it there. Did you just cut a killer new miter and just want to share it ? Share it there. Anything you want to share that doesn't involve a question, share it there. Speaking of which, I should probably share this there.