The Hub

Hi Folks Newbie here so please bear with me. I have a lovely early 90's Yamaha LD-10E acoustic in for repair, I think all solid wood? made in Indonesia and a lovely sounding instrument, however the electrics are letting it down. The pre-amp has a PCB populated with SMD electrolytic caps. Many of these have leaked and destroyed the PCB pads underneath. Repairing the traces is nigh on impossible so it looks like I'll have to replace t…

Hello again folks, how is everyone! So I'm curious about what people here think about re-tops, who's done them, and what sorta ballpark rates you've charged for past completed jobs. I've got a bit of a wild one here, so strap in if you've got a couple minutes for story time! Back in 2012, I traded an HD28V of mine for a cool 1966 D-35 that needed some work. Basically, the body and neck of the guitar were fine apart from…

Here's yet another acoustic guitar bridge tear off, this time the sound board came with and was damaged. The bridge is not damaged and can be cleaned up. But how would one go about repairing the sound board where the pegs? this is another skill building exercise - not a customers guitar. I included pictures of the bridge plate. If this has already been covered here, please provide a link. Thanks again very much to this great group…

Hey everyone, I'm a technician at a music production school in London. As the most 'guitariest' technician on staff, I've become the de facto guitar maintenance person. A big part of my work is taking a look at each guitar once a week. Usually my "routine" is to check action and intonation, making adjustments if needed, then cleaning/polishing. The thing I struggle with the most is getting strings feeling good. We use D'Addario…

It would be helpful what this group is doing regarding fret glues, no glue, wicked-in thin CA, slot fill medium CA +/- acceleration, aliphatic? What do folks like/dislike and why? Do you practice differently bound vs unbound? How do you minimize cleanup after thin CA? Does it matter acoustically if the frets are glued? It adds time and the risk of a CA mess to the job … Thanks

I have a Taylor Acoustic in for a setup and I had a couple of questions: 1. My main one is how you would go about gluing the label back on? I'm probably overthinking it but I'm curious if there's a universally recognized way of doing this? 2. I have some very minor finish damage which I'm not planning on touching, but I am curious how one would go about repairing it. Would this be a case of drop filling lacquer? What would be the…