The Hub

Hello, I am building a bass VI for a customer. As with a Fender Bass VI he wants a control plate with 4 slide switches. 1 on/off switch for each of the 3 pickups, but with the 4the switch he wants to control the phase of the middle pickup. Any suggestions as how I should wire that? thanks!

I work in guitar repair for over 20 years and this strange buzz happen only 3 times and i really going crazy. Five years ago a all parts strat neck in G string, change string, leveling frets twice thinking i made a mistake, in some point i made a rudimentar neck jig to tried to repair that neck. Work in that guitar for 3 weeks and string heigth like 3.5mm and yeat, buzzing with not so hard picking just the G, even in other tuning like F…

Hello friends - I am a bass guitar builder who is considering building a neck-through Flying V-style guitar with a 25.5" scale length and a Floyd Rose tremolo bridge. I have not built any neck-through instruments and would appreciate any guidance on where to begin with respect to laying out the design, in particular, getting the neck angle right and the headstock angled properly. Any resources are welcomed and if someone has any interes…

Hi all, I got a cheap Facebook marketplace guitar (“Olympia by Tacoma”) to try my hand at a bridge re-glue. The removal went okay, though I definitely learned a lot and will do better next time! The finish wasn’t masked in the bridge area, which is to say the bridge was glued to the finish, not the wood. I don’t know if that made it more prone to tearout or if that’s entirely explained by my lack of finesse with the pallette knives. Any…

Im going to attach some photos of a 000-style guitar from Potomac(I believe an Eastman product) that has some top cracks and deformation around the neck block from what I assume to be a shift of the neck block. How do you all approach repairs like this. Im thinking that pulling the neck and somehow pushing the block back into place from the inside is about the right course of action, but if anyone has some advice, Id appreciate it! In th…

Has anyone had any experience using a color dye in TruOil? And if so, how did it work for you? I have been dying an electric bass body with Rit black dye, but once the TruOil started going on, the color started moving around leaving lighter spots. Any thoughts or advice?

Friends - My "go-to" truss rod for my basses has been the rod sold by LMII; however, since they are now out of business, I am evaluating what other rods are suitable for bass guitar necks. The attached photos are all showing truss rod lengths from the front edge of the nut slot location on the blank. One photo shows my last LMII rod (23 1/2" in length) vs. 2 other rods, one longer (23 11/16") and one shorter (22 1/4") -- all measured f…

I need some advice on replacing some saddles. I have been restoring a "dumpster dive" 1972 Gibson SB-400 bass, with a Multiplex bridge. It has nylon saddles, one of which has a crack. The screws upon which the saddles ride are not removable, as the end has an enlarged cap (see picture). How do I replace the saddles without destroying the screws? I repaired the cracking nylon saddle by supergluing two layers of fiberglass wrap (used for f…

I recently took the neck off a 1972 Gibson SB-400 Bass. The tenon is 1" X 3 1/8". Foam cutters were used.

Hey all, I am really enjoying digging through the looth group. I have not yet watched all the ding kings vids or read all the amazing comments and articles here, but I've been appreciating some of the loothing for dollars stuff, seeing other people's intake sheets, discussions about dealing with customers, and it led me to this question: How do people deal with customer expectations, liability, and the inevitable accidents that can happ…

Friends, I am looking for a wiring schematic that shows how to set up 2 humbuckers, each with their own Volume pot -- no Tone in this circuit. Everything I have has some type of Tone control in the circuit. Any suggestions? Thanks!

In the process of evaluating the repairs needed on this guitar I checked to see if the truss rod was working. There is hole in the transverse brace where you would normally insert a truss rod, but all I see is the end of a metal bar with a smallish hole in the center. I tried several allen wrenches that would fit in the hole, but nothing seems to grab. Did they really eliminate the adjustable truss rod on this vintage reproduction? Here'…

Got a 60’s Hofner bass coming in that is noisy and feeds back (according to the owner). Thoughts on why? Any chance taking out the control plate screws could be an issue?

Friends - I have an unexpected problem with my 1989 P Bass-Plus. I suspect that the Series-Parallel switch is grounding out (ie, short circuiting) when the 3-position pickup selector is in the P pickup position (disengaging the J pickup and all 3 pickups). I am waiting for feedback from Fender as to whether there is both a wiring diagram for this bass and the possibility of getting a direct replacement switch. Has anyone worked on these…

Refretted my Yamaha Studio Lord 550 with jumbo frets. This is my second fret job. First was on a bolt-on BC Rich neck. The Studio Lord (Les Paul copy) was my first set neck project. It is pretty good. No fretting out. I set the action at 4.5/64 on bass and 3.5/64 on the high strings. Today I noticed that if I bend a high F to G (13th fret on first string), the note frets out (I can get to F # no problem by bending from the 13th).

Dear looth community/colleagues around the world, During 2023/24 I have developed a digital gauge to measure so-called longitudinal twist of (bass) guitar necks: the LTwist® gauge. Just to be clear, this is about the "cork screw" type of deviation along the length of a neck, not the bow of a neck. I think there is no need to explain how a too severe neck twist can make it difficult or even impossible to set up a stringed instrument (guita…