The Hub

I work in guitar repair for over 20 years and this strange buzz happen only 3 times and i really going crazy. Five years ago a all parts strat neck in G string, change string, leveling frets twice thinking i made a mistake, in some point i made a rudimentar neck jig to tried to repair that neck. Work in that guitar for 3 weeks and string heigth like 3.5mm and yeat, buzzing with not so hard picking just the G, even in other tuning like F…

Hey all! Anyone know what lacquer pigment might better match the deep black colour of this tele body? It’s an American tele deluxe with a nitro finish. Photos show: Finish damage was the size of a quarter. I’ve filled and levelled the area and sprayed on coat of Oxford black nitro. I poured a puddle of naphtha on to check the match and unfortunately no dice. I’ve used Oxford black many times for overspray during repairs and have always fo…

Hey all, I am really enjoying digging through the looth group. I have not yet watched all the ding kings vids or read all the amazing comments and articles here, but I've been appreciating some of the loothing for dollars stuff, seeing other people's intake sheets, discussions about dealing with customers, and it led me to this question: How do people deal with customer expectations, liability, and the inevitable accidents that can happ…

The back of the neck pocket is under the 15th fret slot. Holes are drilled 3/8" from the outside edge of the fret board. Check out Ted Wordford's video at for extensive work he did on a '63 Sorrento.

In the process of evaluating the repairs needed on this guitar I checked to see if the truss rod was working. There is hole in the transverse brace where you would normally insert a truss rod, but all I see is the end of a metal bar with a smallish hole in the center. I tried several allen wrenches that would fit in the hole, but nothing seems to grab. Did they really eliminate the adjustable truss rod on this vintage reproduction? Here'…

In this video, I show an alternative way to remove humbucker covers with no soldering required. Check it out and enjoy!

Friends - I have an unexpected problem with my 1989 P Bass-Plus. I suspect that the Series-Parallel switch is grounding out (ie, short circuiting) when the 3-position pickup selector is in the P pickup position (disengaging the J pickup and all 3 pickups). I am waiting for feedback from Fender as to whether there is both a wiring diagram for this bass and the possibility of getting a direct replacement switch. Has anyone worked on these…

Hello! This is my current build! https://www.instagram.com/p/DMO6PqXRAkg/?utm_source=ig_web_copy_link&igsh=MWdhbW4wdG51bDJ4ZQ== "Here’s a quick check-in on the two guitars I’m currently working on. The bodies are getting ready for binding(arm bevel too!), while the neck is in the middle of headstock design. For the tiger-patterned guitar, I’m planning to inlay Jakho-do (Korean tiger-and-magpie painting) with mother-of-pearl. The other one…

Dear looth community/colleagues around the world, During 2023/24 I have developed a digital gauge to measure so-called longitudinal twist of (bass) guitar necks: the LTwist® gauge. Just to be clear, this is about the "cork screw" type of deviation along the length of a neck, not the bow of a neck. I think there is no need to explain how a too severe neck twist can make it difficult or even impossible to set up a stringed instrument (guita…

[ The majority of my learning has come from the Blues Creek Guitars YouTube videos and reading books (i.e. no mentor/formal training). ] When I checked the centerline (picture with ruler is pre-adjustment), I was slightly off the perpendicular. So I removed a tiny amount from the cheek (side with the purple tape), getting that nice and flush and centerline where I want it. But now I have a .035" gap on the other side. What should I check…