The Hub

Pretty standard dovetail joint with the pocket 1/8th inch further north. I angled the bit through the 13th fret slot (12 fret guitar) and managed to get the neck off without any complications. I don’t know how earlier or later Larson made instruments compare to this one.

This rather old mandolin (20's or 30's?) requires a neck reset to make it playable. The neck is attached at an angle to the body. Does anyone know, or have an educated guess, as to how the neck is attached to the body?

Hey looths, Thoughts on process on this here guitar. I have a D-35 that has… 1) a drastic bow in the neck 2) quite a shallow neck angle So diagnosis is, without an adjustable rod, I will need to compression fret this neck to get it back straight, and then proceed with a neck reset. I’m wondering how fellow looths would approach this. Pull the neck and do the refret, then adjust the angle. Or do the reftret, and get the neck relief where we…

Happy New year everyone!!! I have an LMII neck angle jig but only have the dove tail templates. Would like to try a bolt on for my next acoustic build. With LMII's unfortunate departure do you know where I can get the templates for the mortise and tenon? Is anyone making these? perhaps our friends fortunate enough to have a CNC? I tried making one for a ukelele build but with the tools I have, not confident in the accuracy. Any leads are…

I have a Hoffner bass with a neck that broke loose. The main problem seems to be that that neck was loosely fit and was relying on a thick layer of glue at the bottom of the neck pocket to hold it in place, it looks like some shimming is in order. My question is about getting the neck angle correct. With the bridge thumbscrews at the bottom of their adjustment, should a straight edge on the finger board touch the top of bridge, or the to…

I recently installed a new "Billet T-Bridge" on a Mule tricone resonator guitar. The neck center line on this instrument is pointing 9/32" toward the treble side of the end pin. This means the saddle has to be as far to the treble side as possible so that the strings line up on the neck. This makes the angle of the treble strings coming out of the tailpiece more splayed than the bass strings. The guitar is coming back, as the player s…

This is a Suzuki violin company 'Three S' OM-style guitar, circa 1970s. This particular instrument was sold in the Japanese domestic market (my customer purchased it in Japan) but I've seen others in circulation here in Australia so presumably some were exported too. Sides and back are laminated rosewood, the top is solid spruce. Although this ended up being a relatively standard reset, I feel like this is worth documenting as prior to…