The Hub

We just ordered the StewMac buffer. Looking for ideas/photos for a hood(s) to remove all the particles flying off. We have a 4 inch 1250 cfm dust collection system. Thanks for any input. Tom K

I am a retired dentist. One saying we had was, “You can’t fix what you can’t see.” And another was, “The day you start working with magnification will be the best and worst day of your practice.” The worst because you will see what you have been missing, and the best because you will never miss it again. So even though I have my Dan E. Model visor loupes, and my retired dental loupes on throughout the day, sometimes, it’s not enough. I pi…

Hey folks! I picked up a neck relief gauge from Doug in one of the earlier batches, maybe the introductory run? Some of the small feet caps that thread onto the moving legs of the tool have cracked, broken, or become worn down. I contacted StewMac about purchasing replacement parts, but they don't sell subparts for the relief gauge and otherwise won't help me. They appear 3D printed, so I was wondering if anyone with the means to print s…

It’s Factory Friday! I’ll be in the shop today from 2–4 PM Eastern for the weekly open office hours. Drop in, hang out, ask questions, talk tools, guitar building, SMF, or whatever you’re working on in your shop. No agenda. No presentation. Just shop time. Join at www.stringsmicrofactory.com/factoryfriday See you this afternoon! ✌️

Where is everyone getting their shim stock from? Looking to buy blanks in bulk - mainly for electric neck pockets. Thanks!

Here it is. I thought it turned out ok. Hopefully it's a help to someone. ☺️

Dovetail was 9/16” deep, and 1 9/16” wide at the back. 15th fret was 1 mm tail side of the end of the dovetail socket but a slight angulation towards the headstock landed in the right place. Hide glue, released easily. Nice everyday player, finish and binding beautiful, good spruce top, warped poplar neck.

The archived video and recent Council of Elders were very helpful in upping my binding reattachment game. Now I need to correct how much I've been charging! Someone mentioned that Martin pays $90/individual separation, I believe regardless of the length of the separation. Does this include finish repair, if needed? Any other guidelines on pricing for binding reattachment will be appreciated. Thanks! Neil

Hi friends, I was at a colleague's shop this morning. He’s a pretty well-known builder. A customer has asked for names (several… grandchildren, you know) being inlayed in abalone in a fingerboard and he’s feeling out of his depth for this task. I have volunteered to help find a colleague who'd be willing to do it. Anyone interested in doing this? Any recommendations for a talented colleague? Thanks friends.

Trying to see if anyone has tried this device by chance and if so what was your experience with it.

Discussion cards now have a new feature for following posts that you neither posted or are replying to, but still would like to know when there is action on them. You can select to either be notified on through the bell icon in the header, or you can be emailed, or both. Hit the manage account button in the profile header and you can manage the posts you follow. You can even select the frequency of the emails to something less spammy.

After several years of fighting with my bandsaw blade jumping off every few inches of cut (it needs a new bearing on the top wheel), I decided to try something bass-ackwards. I put the blade on with the teeth facing the 'wrong' direction. Not only did that solve the problem of the blade jumping off, but it has made the cutting of pickguard material much smoother. Has anyone else experienced this kind of situation? Do you have any other…

I have a martin DX 175TH that is in for a bridge lifting. I did some research and it has an HPL top and a rosewood bridge. I have some gluboost gel on hand but I was wondering if anyone has a better suggestion.