The Hub

I watched the Guild F-20 video (https://dev2.loothgroup.com/groups/repair-and-restoration/forum/topic/cracker-x-braces-on-guild-f20/#post-60310) with great interest since I've been working on a Gibson L-3 with a similar problem. A little back story - The original repair request was to address a small pickguard crack on the sound hole side. After peeking inside, I saw 5 loose brace ends on the treble side. Still a pretty standard repair…

Hi all I'm looking for a 4 bolt 70s fender neck. rosewood board. I have one with just way to much back bow and the customer would like to replace with period correct if possible. happy to get it from anywhere depending on cost etc. if you have anyone you know who may be a good contact also let me know Thanks Andy

I would really appreciate some advice on this repair that I need to do. I've built a number of (classical) guitars so far, but this is my first repair job. I have already set the expectations with the customer that I can probably fix it structurally but the repair will be visible. The guitar is modestly priced and of no historical significance so it seems like an ideal project to take on as a first one. The guitar suffered a blow on the…

Hello fellow looths! I recently had a customer come in with a '71 Fender neck that is a fusion of the 60s and 70s style. It has a veneer fretboard, no skunkstripe, 4 screwholes, 70s style tuners, 70s headstock logo, and it seems like it has a poly finish on the back of the neck, and nitro (with cracking) on the front of the headstock. Can anyone tell me if this combination is possible or could it be fake? Another thing is, even without th…

Okay gang I have a doozy of a crack repair. Young guy brought in a Epiphone LP Limited Ed. He had picked up the case while it was unlatched at the guitar took a nasty tumble. Severe finish damage, and the wood has a shear split in it as well. The undercoat is thick with a thin layer of nitro color on top. Spoke with a sweetwater rep and they said that the finish was nitro. Here's the guitar specs via Zsounds: Epiphone Inspired by Gibson…

Hey everyone, Recently I've been struggling to determine how much to charge the customer in regards to parts for a repair. The best example of this I can give would be guitar strings. Occasionally I'll buy strings on sale, other times when they're not on sale, and since cost of strings often varies, I may buy strings at the start of the year, and at the end of the year the price will be different. So the question is, what variables do I…

Hey all, I’m curious to know people’s general thoughts on the appropriate or ideal saddle height after a reset. And, when to replace a bridge that’s been shaved down. I know there are a lot of factors (for me anyhow) and this question could open a whole can of worms when it comes to the specifics of the guitar, its age, style of bridge and desired sound. I’m providing an example I encountered recently, but would also like to know people…

I'm not sure this belongs in this subcategory, but not sure where else to post it. Could use another set of eyes and expertise on this. Customer came through yesterday wanting to sell a 1950 Gibson L-48. It's been played and loved quite a bit, but despite that it plays and sounds very well. The tuners are cheap replacements, the fingerboard being well worn, and the missing finish in areas, otherwise it seems like everything is structura…

I had a very unique instrument come into the shop yesterday. It's an American built Weissonborn/lap guitar (*spelling). The top has separated from the kerfing and sides on the lower left bout, and was raised significantly while under string tension when the customer dropped it off. I have a two fold problem as I see it. Applying horizonal pressure to a very light and fragile instrument, and getting enough glue into the separation where…

my customer bought this used with the original saddles replaced by nylon saddles and would like to restore to the original brass saddle inserts. anybody got a set or an address where I can get them (made)? thx Age

A customer brought me a new Hummingbird with fret buzz a few weeks ago. After performing what may be the best levelling job I've ever done, the buzz was reduced, but still noticeable, though it sounded different than normal fret buzz. When I noticed that the sound was worst when playing F2 (on the A string or D string), I did a frequency analysis and discovered that the main top resonance was at 163.9 hz, and it all made sense. Those…

I picked up a few samples of the Hard Wax Oil from LED Coating Solutions. I wondered if anyone has experience with this product, specifically with mixing liquid dyes to customize the finish. I'd prefer to tint the clear finishes as needed instead of buying so many samples (they are a bit pricey). Let me know. Thanks!

Hey all, I am really enjoying digging through the looth group. I have not yet watched all the ding kings vids or read all the amazing comments and articles here, but I've been appreciating some of the loothing for dollars stuff, seeing other people's intake sheets, discussions about dealing with customers, and it led me to this question: How do people deal with customer expectations, liability, and the inevitable accidents that can happ…

A fella left his 1994 Gibson Blues King locked in a damp garden shed through a hot humid summer. See attached pics! The clear coat has lost adhesion pretty much everywhere on the neck, back and sides, and is starting to let go on the top too in places. But 95% of the colour underneath seems to be hanging in there. Customer is open to a full refin. But I'm wondering how exactly the colour on these was applied, why it seems relatively…

Call for Luthiers and Small Makers Daymaker Music – Bainbridge Island, WA Daymaker Music is opening this November in downtown Winslow in Bainbridge Island, and we’re inviting makers and luthiers who value craft, sustainability, and community to help us shape what customers see and hear when they walk in. We’re looking for small makers, independent luthiers, and custom builders who want their instruments on a dedicated wall of our new retai…

Hi all, A customer brought in a 1970 Maton CW80 12 string...it needs a neck reset. Has anyone done this successfully (or alternatively have a sad story about how it's impossible)? I found one article detailing a workaround and showing a very odd neck architecture (https://harmensmusicblog.blogspot.com/2019/05/maton-cw-806-1977-dreadnaught.html) - doesn't sound/look promising....Any feedback welcome :) cheers, Steve.

I have a customer with a PRS Semi Hollow Special 22, it features two Duncan humbuckers in the bridge and the neck, and also a Narrowfield pickup in the middle. He wants to drop the volume pot down from 500k to 250k to have the humbuckers a bit darker overall. The issue that he has with this is the middle pickup is already quite dark, and how wants to retain its sound. I was wondering if adding a resistor of 250k to the hot lead coming f…

Hey Loothers, A client reached out requesting a neck with wider nut for his headless Ibanez 7 string. He would like it built with rosewood for the neck and the fret board which has been stored for years at a consistent 45 to 50 % humidity in his home. The frets are angled to make it play more ergonomically but it is not a multi scale instrument. He plays finger picking fusion style and simply needs more neck width at the nut to play mu…