The Hub

Hi everyone. I just wanted to share a new (free!) tool I made, a website for designing fretboards. https://fretboard.buzz. It's similar to FretFind2D, but modernized, with many more features, including fretboard markers, a 'flip' for converting any design to lefty, support for mixed units of measure (use both metric and imperial at the same time), etc. I spent months building it, I would love to get your feedback. Thanks!

Breedlove Roots D/SRH (basically an HD28V) on the bench with a non functional trussrod. Wrench will engage, but the nut just spins and no change in relief in either direction. Pretty sure the nut is stripped at the rod end, but due to the neck block design, there's no way to access it without pulling the neck. Anybody ever replace a trussrod in one of these? The neck is a bolt on, and the fingerboard extension is glued down, so only…

Hi all, I have my next bass guitar design on CAD and in drawings. My designs are pushing the size envelop. I would like to have a good thorough review of the design for strength at the neck/body union, playability as string spacing is 13mm and neck is very narrow (1.6"), string pitch at the headstock, strength at the headstock/neck union etc. I'm willing to compensate for your time. Let me know if you are interested. Thanks.

I'm the proud new owner of a "new to me" Fireball Meteor CNC machine. It feels really odd to have a computer in the shop but I guess I need to get used to that. Fortunately for me, I am well versed in CAD, unfortunately not so much on the CAM side of things. My 3 kids are all experts and are steepening the learning curve dramatically, this would be overwhelming if they weren't helping. So far I'm using the Fusion 360 personal use versio…

It appears that Trevor Gore's book' "Contemporary Acoustic Guitar Design and Build - Second Edition" is not available at this time. Anybody have a used copy they don't want or need? Or suggestions where to find it? Thank!

Does anyone know of Guitar designing tutorials in Blender? If not would others be interested if I were to create some tutorials?

I am currently drawing up my bridge design in Fusion 360. It has been a lot of fun and has gone really well so far. But I am a little stuck on rounding over the belly. I could easily put a fillet on it. But I want a little more round over on one side than the other. So I made a sketch on a plane of the curve I want to have. And then I try to sweep it across the belly, and it works, but it stops just shy of both ends where I want it to s…

Hey y'all, just been tasked with setting up one of those hoffner violin basses — they're strange but fun things, this is one of the modern reissues but it still has the bridge with the frets hammered into it for saddles. The owner plays in a punk band and has had issues with the low E string jumping out at times. I assume without some way of getting the tailpiece to be held down rather than at the angle it wants to be, the best option w…

@member@member and I will be discussing design and testing and how it can be relevant in repair and restoration. Also, consider buying his outstanding book on the subject.