The Hub

Hi friends, I just stumbled upon a 1966 P-Bass, nearly completely original. The owner bought it in 1971 and it had already been stripped of its original finish. That was a thing back then. You can guess that 55 years of gigging had the wood absorb much of the owner’s DNA and sweat. Maybe a few beers as well. Surface was quite tacky as you can expect. I cleaned it with naphta and StewMac’c brand-new cleaner (quite a great product I'd say…

First time making purfling to match a repair. Problem: couldn’t get it to bend without delaminating and cracking. Veneer is 6 plies using 4 of SMs 0.023” and 2 maple at 0.025” cut to 1 1?2 inches wide. Glue up with Titebond Veneer glue, final stack at 0.140” thick. Let it dry 2 days, cut a few 0.090” strips, then used some super soft just at the waist and despite going very slowly the strip skewed, delaminated and started to break plies. W…

Hello again folks, how is everyone! So I'm curious about what people here think about re-tops, who's done them, and what sorta ballpark rates you've charged for past completed jobs. I've got a bit of a wild one here, so strap in if you've got a couple minutes for story time! Back in 2012, I traded an HD28V of mine for a cool 1966 D-35 that needed some work. Basically, the body and neck of the guitar were fine apart from…

I am restoring an old Supertone with a thickened and heavily alligatored finish. The finish softens quickly with acetone, and it looks like it has had an overspray. I would like to keep the staining on the oak back and sides, and to preserve the decal on the headstock. The top I would like to strip and sand. The questions are: 1. What more do I need to know about the finish? 2. How should I remove the finish or at least thin/smooth…

Hello, One of my commissions is coming down the pike and it's going to be my first time using bar frets. I could use a once over for any helpful tips if you have any. About the guitar: Aged HD-28 but mahogany back and sides. I think Martin called this a HD-28 M? Skipping the truss-rod and using two carbon fiber strips. My process for Frets: 1: I CNC my fingerboards to a 16" radius and for T-frets I use a .023" to cut slots with a mat…

Hello Friends, I've had a vintage Epiphone acoustic stored at the shop for almost two years and it's about time to wrap it up. That never happens, LOL. It has a few loose braces, which is a repair I've done in the past. The problem with this one is that no matter how I jack up the loose braces from the inside, some parts of some braces simply do not move enough to come in contact with the soundboard. This is happening in a couple…

I just read a small note in a new OM plan (GenOne) I'm using that suggested maple as an alternate wood for the inside center strip between the back braces. Wondering what would be the downside of that (passive back). A curly maple strip would certainly be attractive, and the mass/ stiffness difference is virtually negligible for a passive back. Thoughts? I'm cutting braces this week...

Speaking of Trevor Gore... I've started using falcate bracing on my ukuleles and in making the braces, 3 strips of .0625" spruce are bent and then put in a bent lamination glue up rig using epoxy. Bending spruce is no fun on a hot pipe. It's slow, fussy, the fibers want to delaminate. I have been thinking about building a small dedicated steam box. Pulling all 3 of the strips out at once and bending them over a form with a metal back…

Hey everyone, I have a Vaccaro bass guitar and I'm getting a lot of open note buzz on it. In truth, the bass could stand a refret but that may or may not be in the cards. Additionally, the truss rod nut is stripped. I'm also wondering if this nut is designed to come out? I imagine it is but it's kind of funky. A 1/4" Allen wrench is still too small to grip it. So the questions: 1. How would you deal with the zero fret and the nut? The st…

Hello! I have an Ovation CP-100 pickup. Its unsoldered and I can't seem to get the pickup to work again. There wasn't a spacer either. Which doesn't make sense because if the hot is soldered to the copper strip and the ground to the housing channel, it would just ground out. Any experience getting these back together? Said pickup: https://www.sweetwater.com/store/detail/CP100--ovation-cp-100-thinline-pickup-cream -Mike