The Hub

@member @member Starting the discussion here to get the planning underway. I am presenting at Cremona next year, so I thought I would use the opportunity to do a dry run during this event. Topics - 1. Modeling and 3d Printing Simplified for Guitar Repair Barbarians. 2. Touching up Martin Mahogany. 3. Color and Material Theory Simplified for Guitar Repair Barbarians.

I watched the Guild F-20 video (https://dev2.loothgroup.com/groups/repair-and-restoration/forum/topic/cracker-x-braces-on-guild-f20/#post-60310) with great interest since I've been working on a Gibson L-3 with a similar problem. A little back story - The original repair request was to address a small pickguard crack on the sound hole side. After peeking inside, I saw 5 loose brace ends on the treble side. Still a pretty standard repair…

Here is a super basic thing I just modeled and 3d printed. Small drill guides to place a 2mm hole directly centered in the side of a fretboard. I made a few sizes for different fretboard thicknesses. Seems simple but its a huge time saver.

I've seen the Elevate Luthierie jig, and it seems simple enough. One thing I don't like about their explanation video is the handwaving around "set the joint length where you want it"...feels like even with the jig, you have to do too much measuring to make it fit exactly (or within the tolerance you want) Given I can model well enough in Fusion and have a 3D printer, feels like a challenge to take on! As far as I can see, the jig is just…