The Hub

I don’t have CNC capabilities so I could not duplicate Dave Slimmer’s version ( https://loothgroup.com/loothprint/bridge-clamping-cauls/). Got a 12x18x1/2 inch HDPE cutting board on Amazon for under $10 (https://www.amazon.com/dp/B001D3LQVA), drilled a row of 1/2 holes about 5/16” deep with a Forstner, cut the HDPE into 5 sided chunks so I could orient by touch, and free handed the brace grooves on the band saw. The clamp swivel pads are 1…

Hey all. I've got the above-mentioned guitar on my bench. It had a neck reset and what appears to be a new bridge pad put in 14 years ago. It's a crack-free guitar except for a couple of little hairlines running from the back of the bridge to the upper tone bar. I thought that was a bit weird. Inside, everything looks okay until I turn off the inspection light, at which point I can see the rosy glow of daylight through the top - this…

Have you ever had a really stubborn bridge plate to remove? I had one not too long ago that seemed to resist wetting with a damp cloth, and subsequently all the heat I could get from my silicone heating pads. After much effort I got about 80% of it out cleanly. The remaining 20% required hours of work with a finger plane. That experience made me think about the Brown's Guitar Factory bridge plate removal tool I had purchased years ago,…