The Hub

Hello looths! Long time lurker, first time poster here all the way from New Zealand. I have recently acquired this 2008 Martin D-35 for a very cheap price ($1000 NZD - around 600 US!) it's dried out in a very cold environment and has two substantial cracks running all the way across the top, one large side crack, and a previous side crack repair that's been done quite poorly. I'm only about 3 years in to this repair journey and this is d…

Technically this is a repair, but I thought there would be some crossover with building, so I posted here as well. A 1950s Gretsch Town & Country Rancher 6021 is missing the two braces on either side of the sound hole (see photo). Because this is such a wide instrument (17” lower bout), I’m thinking that installing those missing braces will help with the stability of the top in addition to repairing the cracked/loose ladder braces. The…

A customer recently brought in a 1950s Gretsch Town & Country Rancher 6021. In addition to two main ladder braces being loose/cracked, it’s missing the two braces on either side of the sound hole (see photo). Because this is such a wide instrument (17” lower bout), I’m thinking that installing those missing braces will help with the stability of the top, which is pretty sunken right now. Does anyone have any photos or measurements of or…

So, like an idiot, I got well into the installation of an Anthem pickup system when I realized that the soundhole braces on this guitar are effing Lincoln Logs. They're easily a quarter inch thick (and feel like basswood). Because the Anthem preamp is designed to straddle the soundhole brace, I can't fit it as-is. Anybody got any experience with this? OPTIONS THE CLIENT WOULD NEVER GO FOR (and wouldn't thrill me either): 1. Replace the bra…

Hey all, I have a client who wants a fishman soundhole pickup and a k&k mini wired to a volume pot on a Martin 000. Both pickups are pre-wired to their dedicated output jack, so I know some splicing has to be done. I wanted to reach out and see if anyone has any tips or tricks on how to make this smooth sailing?

Hey all, I have a Guild JF30 in my shop that needs some sizeable touchups. The goal is to get this looking better, not necessarily perfect. I'm not particularly good at refinish work and this guitar has some rather sizeable dings. Any general suggestions on getting this to look better? There are four major locations that I'm concerned with. The headstock, the back of the neck, the ding in the lower bout of the guitar, and the mark in the…

Hey y'all, Got another interesting job I'd like some advice on. It's a 70s yamaha classical the current owner inherited from his father. At some point it developed a rather nasty top crack, to the point that I'm thinking the job would involve fresh spruce being applied in there. That's routine enough at least, albeit uncommon for New Zealand's climate in my experience so far. (Also open to suggestions on cleaning out the crack to accept…

What size do I need for gluing acoustic bridges (5"? 6"?) and is there cost effective source for these? Thx!

This is a Suzuki violin company 'Three S' OM-style guitar, circa 1970s. This particular instrument was sold in the Japanese domestic market (my customer purchased it in Japan) but I've seen others in circulation here in Australia so presumably some were exported too. Sides and back are laminated rosewood, the top is solid spruce. Although this ended up being a relatively standard reset, I feel like this is worth documenting as prior to…