I don’t have CNC capabilities so I could not duplicate Dave Slimmer’s version ( https://loothgroup.com/loothprint/bridge-clamping-cauls/). Got a 12x18x1/2 inch HDPE cutting board on Amazon for under $10 (https://www.amazon.com/dp/B001D3LQVA), drilled a row of 1/2 holes about 5/16” deep with a Forstner, cut the HDPE into 5 sided chunks so I could orient by touch, and free handed the brace grooves on the band saw. The clamp swivel pads are 1…
Like many of us, I work in a small space - a quarter basement with maybe 6 -1/2 feet of headroom. Sawdust is a problem. There’s no room for an extensive ductwork system or a blower setup. My shop tools (bandsaw, drill press, vertical belt sander, etc.) have a 1-1/2 inch connection for vacuum, but I have mostly been too lazy to use them. (note that I finally added a portable shop air cleaner with HEPA filters). When the most recent Wo…
I'm between shops right now and have a bunch of lutherie tools in a U-haul storage facility on 4th ave in Brooklyn. Here are a few of my local craigslist posts. I've also got a bunch of wood I'll be listing in some form or another. Let me know if anyone would like to come by and have a look. Use the "more ads from this user" link in CL posting to see updated and additional listings. thanks! https://newyork.craigslist.org/brk/tls/d/brookly…
Hey there fellow Looths! I'm still learning and just starting my luthier journey, but I'm serious about it and want to design and build my own workshop. I have space for a 4mx4m (13x13ft) workshop. I know it's kinda tiny but I think it can do the trick since I want to work analog/by hand for most of the tasks. I plan to buy a drill press and a band saw. That's all for 'the big machinery'. I'm just curious if people have tips or 'things to…
PPP9 replies
9 replies
LikeShare
PPrivate member
I personally don't like anything in the middle of the room because I will run into it(my stool is the only thing that floats around the room), and with such small space you need room to move. When I b…
We hear a lot in LoothLand these days about 3D printing. I think it's an awesome use of that technology for what we all do. With my long history with AutoCad and 3D rendering in my previous life, I should pull the trigger on a 3D printer, but I'm just not ready yet AND I have no available space for one in my little shop or in my office right now. Yes, 3D printing is great, but sometimes, good ole regular printing can be a surprise frien…
Hey all, I’ve got a Prewar Martin on my workbench (1932/33 0-18) and this thing has unfortunately been through the guitar center wringer. I’ve had to reset a fretboard that was glued down with Gorilla glue and as well, rejoint the neck and underside of the fretboard. I had to repair a large deal of tear out that was sitting underneath their fret job and because of that I now have a brittle fret slot all up the board that will not hold a fr…
There are one or 2 videos reviewing it. Im pretty sure Andrew Klein who does work for magswitch posted a video about it or similar product. It did not handle chips from a forstner bit well if i rememb…
