The Hub

Rodrigo Gomes pulls a dead truss rod out of a Fender bass, coves a new fretboard to fit the neck, and refrets it — in Dan's shop, 2017. Out with the old rod A new fretboard, coved to fit Routing the c…

Two Letters from Joseph DiTucci “Sometimes our greatest hardships and darkest moments forge the way for our brightest futures.” Two years ago — August 21, 2024 — I received this email from Joseph at D…

Part one of a 1955 Gretsch Roundup restoration — a played-to-death cowboy guitar with a loose, up-bowed neck and a truss rod frozen solid. Reprinted with permission from Vintage Guitar Magazine. Origi…

Splinting a crack in an old Epiphone archtop — with spruce borrowed from the guitar’s own fretboard extension, and a sliver of old piano soundboard.

B.K. Vaught walked in with a heavily modified, refinished '57 Strat. We put a three-person team on it — strip the paint, replace the decal, narrow the bridge spacing, and bring it back to playable. Re…

Stepping down a half-dozen Strat and Tele necks from 7¼" to 9.5" — with no fretboard to hide behind. In 2018/2019 we made a half-dozen Strat and Tele necks from what, to me, was special wood: some ver…

Mentors and Olson Routing Rings Mentors, molds, and the Olson routing rings that replaced "driving the bus." Hello again, welcome to episode 2. I’m pumped! Last time I did my best to say hello and upd…

Jumping In! — by Todd Lunneborg An intro and, “Getting ready for the Fretboard Summit, 2026.” Hello there, Todd Lunneborg here. Ian has asked me to start writing regularly for the Looth Group Website.…