Lite members only
Unlock
The Hub
Lite members only
Unlock
Gibson LG-1 1957 fingerboard extension glue will not loosen
Today I have spent the better part of five hours attempting to get the fingerboard extension free on this guitar. I am using the method I have used for dozens of neck resets: 100 watt halogen bulb with heat shields. After a couple hours I thought I was making some progress under one corner, only to discover after some movement that my palette knife was going through the top. I then abandoned that area and have been applying heat and…
4 replies
4 replies
LikeShare
There's a lot going on here. So I'll make a list The lightbulb I use is the 250 watt infrared bulb. Not sure how it compares to the halogen. If it is hide glue, I like to add spit to my knife. It's tem…
The Pick Guard Dilemma
New to the Looth Group forum so I hope I'm posting in the right place. I am also relatively new to the trade although I've been a woodworker for a long while. I have a general question for luthiers regarding the repair of a typical pick guard issue. I have 2 early 1970's Martin D35's in my shop with the usual pick guard curling and cracks associated with shrinkage. I've watched luthiers flatten and re-glue these back on the bare wood as…
4 replies
4 replies
LikeShare
Ian thanks for the reply. So to be clear you would glue the celluloid to the bare wood area with Titebond? Or are you saying to seal the old area, maybe with lacquer, and contact adhere the new guard…