The Hub

Hello everyone, I hope you're doing good. I'm very much a new guitar repair enthusiast, any advice or feedback would really appreciated. I'm working on this Yamaha FG410A, as you can see, it's in rough shape. The guitar lived in a case in a storage container since the 90s. The guitar was really dry when I got it, so I started my slowly introducing moisture. I removed the frets and then put the guitar in a bag, with a hygrometer…

The folks at maderas barber put together a nice guide on drying wood for lutheie https://maderasbarber.com/tonewood/en/blog/news/practical-guide-to-drying-and-storing-tonal-wood

Hello everyone! I'm having quite a lot of issues with a Jackson Warrior I'm refinishing in 2K Spraymax. After a week, it is still not completely cured and it dents whenever I do the "fingernail-test". This is already the second time this happened. My process is: Sanded the body completely to bare wood, up to 320 grit. Filled with Z-Poxy, let cure for 24h. Sanded back to 400 grit Sprayed 1K primer, let dry for ~2 hours Sprayed 2x 1k color coats…

hello looths - i'm building my first guitar. generally following (and enjoying) the gore/gilet books. after 3 tries, i've yet to get a crack free bend around the nose of a venetian cutaway with a mahogany side. i made a version of the fox bender - using clamps on hand for the waist and cutaway, and a pid temp controller (verified accuracy), and am using a stew mac blanket and three straps. the recipe for my last attempt was: sapelle (fo…

Hello good people, My shop’s in Quebec City, so I get to repair an ungodly amount of cracks thanks to our brutal winter and customers being largely unaware of the requirements of maintaining proper RH. Now for the first time (call me lucky) I have two very good guitars in the shop whose cracks won't close up after having been rehumidified for a few weeks. I have tried over-humidifying and it does it, but once returned to proper RH (50%)…

I had a customer bring in a '76 Ric 4001 with a fretboard separation from the neck around the 3rd and 4th frets. I tried squeezing it closed and the board would not budge. I figured maybe dried glue, wood or schmutz was impeding the fb from laying back down so I made a special little palette knife with a hooked edge to clean it out. I instead hit metal. After a bunch of hemming and hawing since nothing was budging we opted to remove the…