The Hub
Lite members only
Unlock video
Marketing Club: The Miracle of ManyChat
Lite members only
Unlock video
Acoustic Guitar Builders Club: Brace Yourself
Lite members only
Unlock video
3D Club: Node Atlas with Brett Bailey
feedback on Les Paul Headstock repair
Celluloid Chronicles Ep. 2 - Chet Atkins Nashville
Finish Chip Repair help.... Black fill n' finish?
Bridge Reglue Suggestions...
Magician Performs Guitar Pick Card Magic Trick | Penn & Teller: Fool Us
Lite members only
Unlock video
Electric Guitar Builders Club: Frank Brothers Guitar Company
Anyone know where I can find a Thumbwheel tone control assembly like this?
Sterling Maj200xsm - Tunning issues
bozo B80/12 neck block clownery
Dude Built A Rotary Speaker
New Feature - Connect Automatically
D28 blowout
Tonewood for sale northeastern Nevada
Lite members only
Unlock video
3D Club: Strings Micro Factory with Brad Combs
1958 Gretsch Country Gent headstock re-repair
I recently picked up a gutted first year Country Gent with a headstock break. It had been previously "repaired" with mystery glue, nails, bondo and believe it or not.....staples. I am likely out of my depth here but I want to bring this little bit of history back to life. I scraped off the bondo and that is when I found the staples hiding underneath. I removed the staples and gave the headstock some gentle pressure and found that the gap where I am pointing in the pic was opening up a bit.
My initial plan was to replace the peghead veneer & Gretsch inlay on the front. Then add another veneer on the back and extend it down across the break for some added strength. I might just leave the nails in there since pulling them out at this point might create more problems than it solves. Now I'm thinking I'd need to remove the headstock entirely, scrape off whatever glue was previously used, re-glue and clamp and then go from there.
I'm guessing splines? And a backstrap/veneer? I think that would be stretching my abilities quite a bit. Send help! :)














