A Fender Bass Truss Rod That Just Spins
LikeCommentShare
The Hub
Lite members only
Unlock video
Marketing Club: The Miracle of ManyChat
Lite members only
Unlock video
Acoustic Guitar Builders Club: Brace Yourself
Lite members only
Unlock video
3D Club: Node Atlas with Brett Bailey
feedback on Les Paul Headstock repair
1 reply
1 reply
LikeShare
With a break like this with plenty of surface area, I would just glue it without any additional supports. My glue of choice is hot hide glue, but there will be lots of opinions on that and many option…
Celluloid Chronicles Ep. 2 - Chet Atkins Nashville
1 reply
1 reply
LikeShare
Finish Chip Repair help.... Black fill n' finish?
2 replies
2 replies
LikeShare
I think that's a good move. One thing I might do to kick things of is to hit the area with some ultra thin master glue so it wicks under the area and prevents more chipping from potentially delaminate…
Bridge Reglue Suggestions...
3 replies
3 replies
LikeShare
Unfortunately it's an absence of material on the bass and treble sides. @member
Magician Performs Guitar Pick Card Magic Trick | Penn & Teller: Fool Us
LikeShare
Lite members only
Unlock video
Electric Guitar Builders Club: Frank Brothers Guitar Company
Anyone know where I can find a Thumbwheel tone control assembly like this?
4 replies
4 replies
LikeShare
I get them from Mouser Electronics but you can also get them from WD Music Products https://www.wdmusic.com/alpha-thumbwheel-potentiometer-250-kohm-500-kohm-details.html#menu
Sterling Maj200xsm - Tunning issues
4 replies
4 replies
LikeShare
Hi guys, I finally managed to sort the problem out. Seens like was a simple issue that I cant see in that moment. I took the whole bridge apart and did a complete setup from scratch. I read somewhere…
bozo B80/12 neck block clownery
1 reply
1 reply
LikeShare
This is precisely why Leo Fender developed the insideless guitar. A compromised neck block is super hard to come back from and when I see something like this, it leads me to believe that it's the tip…
Dude Built A Rotary Speaker
LikeShare
New Feature - Connect Automatically
1 reply
1 reply
LikeShare
D28 blowout
2 replies
2 replies
LikeShare
Chris, can I add this for the council of elders show ? Also, we are going to have @member on pretty soon to talk about a job about this dramastic. Here's a link to the live show co…
Tonewood for sale northeastern Nevada
2 replies
2 replies
LikeShare
Sean, may add this to the weekly email ?
Lite members only
Unlock video
3D Club: Strings Micro Factory with Brad Combs
Upright Bass Fingerboard Reglue
Hey everyone, I had a question on regluing the fingerboard on an 3/4 scale upright bass. The surface of the neck where the neck/fingerboard meet is fairly clean and shouldn't pose too much of a problem, however, the fingerboard itself has a fairly significant backbow of around 1/16" or 3/32". I'm wondering if you all had any suggestions on how to manage this. The customer would be pleased for the bass to be put back together and considers it something of a knock around instrument. I have two thoughts:
-Create a "sled" and route the underside of the fingerboard so that it's roughly flat, then sand it flat and glue it to the neck. Since the fingerboard is quite a thick piece of ebony, I think this is doable although perhaps not ideal.
-Scrape the glue from the underside of the fingerboard and apply heat/steam from an iron, and then clamp it a slight upbow and leave it to set. Or maybe use heat blankets or something of this sort. I'm less enthused by this since I've never had great luck with this method. Also, considering the thickness of the board, I'm not sure how viable this would be.
Any advice would be appreciated, thanks!
-David
