The Hub

So the first real "full build" I'm doing is a Stewmac 000 kit. I was wondering about the back brace shape. I'll was planning to taper the ends at the side joint to about 1.5mm. Should I do some scalloping of the braces? Suggestions and comments are welcomed and appreciated. Regards, Gerry Images

I am retopping a guitar and while it's open I want to reduce the mass of the back braces. Since the sides are in the way, I can't figure out how to cleanly cut the excess brace wood away; anything I've tried involves the handle hitting the sides and preventing a controlled, clean cut. Is there a tool - say a "pull finger plane" - that I can pull from the edge to the middle of each brace to facilitate this?

Good evening folks, lately I'm experiencing some sanding methods/mechanism frustration. Can't explain better than look like I'm regressing at doing it. The only thing changed in my building routine is that I'm currently using a CNC (I haven't used one for some years) for both bodies and necks. I have no problems with necks, but sanding bodies has become incredibly frustrating, specially around the edges. While I keep improving my c…

Here You'll seehere pin tip sized bubbles. Nitro finish. It got hot in a case. They'll need a light amagolmater mixture applied to melt'm back into the surface. Im looking for advice on the recipe for said amagolmater....Straight retarder? Im not sure if Id need lacquer in the mix that I apply....Thank you! Colin O'Brien LittleCreek Instrument Repair, Nashville. Images

I picked up a set of these chisels a couple years ago at an estate sale. They were in a very sorry state but had clearly been used and loved. I gave them a good cleaning and sharpened just the smallest one, which took a very nice edge. I'm debating sharpening the rest in order to sell them along with my Narex chisels (which I haven't loved) and replacing them all with a couple Lie Nielsen chisels only in the sizes I really use. Anyone h…

Hey guys, does anybody know of a good alternative to mixol? I use it in lacquer for mixing opaque colors and it's great but I've been on the lookout for something more affordable and haven't had much luck. Wondering if anybody here knows of anything. Thanks!

A visual dependency map for Autodesk Fusion. It turns complex Fusion designs into an interactive map of model logic, helping users understand how parameters, sketches, construction references, features, bodies, and other design elements relate to each other. Instead of digging through dense timelines, browser trees, and feature chains, Node Atlas gives users a readable graph of how a design is connected. It is built for designers, builder…

Does anyone have a good glue pot they can recommend. I'm planning to try some hide glue work. Regards, Gerry

I am working on an article to post here on the Looth Group regarding the history, and problems, with scale temperament. In the process, I asked Claude about a particular point, and Claude gave me a quote that perfectly encapsulated the concept I was exploring. I asked Claude to provide the specific citation for the quote. Claude fessed up to outright misrepresentation. Probably nothing new here, but I thought it was worth sharing.…

Hello — I would like to finish a mahogany electric neck and body with wipe on poly (probably Minwax satin) and would like to pore fill with Z-Poxy. I can’t find a definitive word on their compatibility. - Can I just wipe on the poly coats after block sanding the 2-3 Z-Poxy coats? - Should the Z-Poxy be sanded all the way back to wood or just smoothed/flattened? - Is a coat of unwaxed shellac between the Z-Poxy and the wipe in…

Hey all. I apologize if this type of post isn't allowed here but wanted to share anyway. I've been building a tool called Looth specifically for luthiers and repair techs, and I'm looking for a small group of interested looths to help shape it a bit more before it goes public. I got tired of managing spreadsheets and decided that it could be simpler and more automated. The core idea is simple: one place to track every build…

Greetings fellow Looths! I recently received a request from a customer to replicate Kurt Cobains 59 Martin, starting with a Sigma DM3. I have pasted the customers email to me below. While I have been a looth hobbyist for many years, I just recently opened my official business, Finger Lakes Guitar Works, and am just getting off the ground and a good flow of repair work is already coming in. While I feel 100% confident in my abilities to…

Guitar neck topology is worth going microscopic. 🔬🦠 After building my starting surface from a wireframe network in the sketch environment; a system of 4-degree control point spline rails, tangent to projected isoparametric curves along the shaft — I can convert the NURBS surface to a T-Spline and start cleaning up the artifacts left behind by the original loft. In this demo I’m turning on Box Display, which feels strange at first because…