The Hub

The latest builds, repairs, and conversations from across Looth. Activity
Filters AND Search 3d modeling× In Business× In Repair & Restoration× In Market Place× Reset all
Murray FixingGuitars LoothprintRepair and Restoration

K&K Pickup Aligner/Locator Jig – Parametric 3D Print

K&K Pickup Aligner/Locator Jig – Parametric 3D Print Installing a K&K Pure Mini pickup is one of those jobs that looks simple until you're blind, upside-down inside a guitar, and wishing you had a thi…

3D print guitar toolAmps, Pickups, and PedalsK&K Pure MiniNew buildsRepair and Restoration
LikeCommentShare
Private member DiscussionAcoustic Repair

Warped x-brace on Gibson L-3

I watched the Guild F-20 video (https://dev2.loothgroup.com/groups/repair-and-restoration/forum/topic/cracker-x-braces-on-guild-f20/#post-60310) with great interest since I've been working on a Gibson L-3 with a similar problem. A little back story - The original repair request was to address a small pickguard crack on the sound hole side. After peeking inside, I saw 5 loose brace ends on the treble side. Still a pretty standard repair…

2 replies
2 replies
LikeShare
Private member
That move of 3D printing the taper you want and running it through the sander to make a copy just blew my mind! Thanks for sharing Dave!
Private member DiscussionGeneral

Neck Shim spreadsheet

First time here on the forums, not sure how often I'll check in, but thought this the best place to post it. Was playing with an idea proposed by Buck Van Laarhoven on a parametric model for bolt-on neck shims, and found the formulas I wrote up translated easily to Taylor and conventional acoustic neck joints so decided to add boxes for those as well. I'm not well versed in Google Sheets, but couldn't see a way to upload the file direct…

2 replies
2 replies
LikeShare
Private member
Hey Dave Recommend you make a copy of the file to load up. Then your original Google sheet won't be altered by another user in the shared file. You can do that by going to file and click 'make a copy…