The Hub

Hello All I have been using Ted Bergstrand's online nut calculator on Benchmuse.com which is excellent. It allows you to have a consistent gap between each strings vs the progressive gap that the Stewmac rule gives you. Or you can do consistent centers to the strings. I have definitely found measuring the nut with calipers to work a lot better than the stewmac rule and don't use the rule anymore. I wanted some additional functionality…

Hey Looths, I have a 1980 Guild 12 string in the shop and while doing a preliminary examination I noticed this odd discoloration inside of the guitar. My immediate thought was water damage, although it hasn't bled through to the outside of the guitar and lifted the finish. I also thought of glue smear but I can't quite tell. Any thoughts here?

I've owned this Jersey City made 12-string/drone 'harp' guitar for a few years and want to get on the repair. I've taken the necks off many dozens of Schmidt-made guitars but never one with two necks. I've searched the web looking for harp guitar neck removal and didn't find anything of use. Asking for any tips/aids/experience from the loothers. My plan is to make a custom neck removal jig that fits the necks, and then drill the typical…

I'm restoring an old parlor guitar. I have just discovered that it plays 20 cents sharp. Thats not in and of itself a mystery, usually. This guitar however has exactly the same distance from the nut to the 12th fret, and from the 12th fret to the "saddle" which is now a small shim under the two E strings both are 12 3/32"...with room in front of the bridge pins to finesse the location of the saddle slot, which I have not routed yet) I s…

I have a customer with a guitar that has an intonation issue. It plays flat at the first and second fret on the D and G string. The factory spec says its a 25.5 scale but I measure from the nut to the 12th fret 12 5/8. I plugged the number for a 25.25 scale into the Stew Mac fret board calculator and the measurement is off from the nut to the first fret. Unfortunately I now longer have the guitar in my possession so I cant tell you exac…

Just wondering how normal the following is on Gibsons. When I run a straight edge from the 7th to the 15th fret on this modern J45 the 12 fret (and neighboring frets) are 3-4 thousands low. The result is fret buzz on the 9th to the 14th fret on the wound strings. Picture attached. Guitar is around 5 years old and otherwise in very good condition.