The Hub

good evening to all. This one showed up on the marketplace. I'm wondering if its too much to chew for me at this time. Is it a very difficult repair? Is it worthwhile pursuing? It's another $25 crash test dummy. Please, don't hold back. I can take it.

@member hipped me to the fact that Steve Gilchirst has some really nice work detailed in his restoration archives. I think you should check it out. BTW he is super busy, so don't wear him out with emails.

Discussion cards now have a new feature for following posts that you neither posted or are replying to, but still would like to know when there is action on them. You can select to either be notified on through the bell icon in the header, or you can be emailed, or both. Hit the manage account button in the profile header and you can manage the posts you follow. You can even select the frequency of the emails to something less spammy.

I have a martin DX 175TH that is in for a bridge lifting. I did some research and it has an HPL top and a rosewood bridge. I have some gluboost gel on hand but I was wondering if anyone has a better suggestion.

I working through a long top crack repair on a c.1964 Fender Newporter and need to do a little touch-up on the clear coat. The top coat is matte over a do-do brown stained mahogany top, I'm guessing around a 10-20% reflectivity. Questions: 1. What top coat product did Fender use on these? 2. What should I use that has great self-leveling qualities and will melt into the old finish? <>

Guitar fell straight down on the headstock when it was hanging up at the refinishers. Shit really does happen! Grain is pretty much shattered around the adjustment nut. Thinking I’ll replace the entire broken area with a completely new piece of mahogany. Scarf it in between the volute and 3rd fret. Probably even a 3 piece lamination to mimic the neck. This one was not the clients fault so the expectations for looking close to original a…

Who's going to Fretboard Summit this year? I'd love to meet you! I'll be wearing my trusty Looth Group hat for easy identification. I have DMV local looth stickers to hand out as well! Cheers, Kalimar

Hey everyone, I was showing this to James Roadman on the Loothalong, and I thought I’d share it here with anyone who might find it helpful. I was installing an Anthem in a GS Mini, and I couldn’t get the microphone to fit without hitting the ballends of the strings. I had thought about placing the mic on the other side of the pins, but then I decided to use a scalpel and a small file to cut some chamfers into the corners of the mic housi…

Gibson Roy Smeck Radio Grande 7 string! in for tuner replacements... Currently has faulty original grovers, wants waverly titanium that I'd have to modify the plate shape to fit---and drill a new lower hole mount to avoid new holes drilled in the headstock ( around the "e" in waverly logo; and new plate hole and old plate hole would intersect by a whisper ). I'd have to remove the cog to mill & install, but the mounting screw head has c…

First time making purfling to match a repair. Problem: couldn’t get it to bend without delaminating and cracking. Veneer is 6 plies using 4 of SMs 0.023” and 2 maple at 0.025” cut to 1 1?2 inches wide. Glue up with Titebond Veneer glue, final stack at 0.140” thick. Let it dry 2 days, cut a few 0.090” strips, then used some super soft just at the waist and despite going very slowly the strip skewed, delaminated and started to break plies. W…

This is an LP copy from Memphis guitars. It looks like it has had the headstock repaired at some point. Also, there is what looks like some separation of the fretboard near the nut. I don't know if its left over from the repair or if its something new and just trying to go this way. I'm asking the group to look at the pics to help me figure out if any corrective steps are needed. Also from a finish repair standpoint, how to deal with i…

Just posted a full build video for the last mandolin batch over on YouTube. Give it a watch folks, its 25 mins long. And there should be a few woodworking tips there for some of you, and some lovely tunes all played on my work.

I am working on a neck reset on a Washburn Parlor - SN 283552. I have read that the 28 in the SN indicates that is was built in 1928, but the owner thinks based on her research that it was built before 1920. I am assuming a dovetail joint and that I can get into the neck joint for steaming by drilling into the 13th fret slot, but if anyone knows differently please let me know. The fingerboard extension has already separated slightly…

So the first real "full build" I'm doing is a Stewmac 000 kit. I was wondering about the back brace shape. I'll was planning to taper the ends at the side joint to about 1.5mm. Should I do some scalloping of the braces? Suggestions and comments are welcomed and appreciated. Regards, Gerry Images

Here You'll seehere pin tip sized bubbles. Nitro finish. It got hot in a case. They'll need a light amagolmater mixture applied to melt'm back into the surface. Im looking for advice on the recipe for said amagolmater....Straight retarder? Im not sure if Id need lacquer in the mix that I apply....Thank you! Colin O'Brien LittleCreek Instrument Repair, Nashville. Images

Hi There, I've seen a number of jigs, Some seem like they might work with specific size frets but we all know that even same sized frets have some variances depending batch and where on the line it came off the spool. No matter how i do it I seem to scrape the bottom of the fret trying to make it perfectly flush. I've considered using small rotary round burr or cylinder and only touching the tang so if it does go to deep its…

Hi all, I am a newer guitar tech and after dozens of repairs this particular Simon & Patrick Luthier Cedar top SP6 acoustic dreadnought from the 90-ies with a bolt-on maple neck has been an incredible challenge. It came with a maxed out and stuck truss rod with a considerable up bow in the neck, extremely low saddle with barely any string break angle, so it needed a neck reset. Later on I figured out that it also has a pretty dras…

I'm restoring an old parlor guitar. I have just discovered that it plays 20 cents sharp. Thats not in and of itself a mystery, usually. This guitar however has exactly the same distance from the nut to the 12th fret, and from the 12th fret to the "saddle" which is now a small shim under the two E strings both are 12 3/32"...with room in front of the bridge pins to finesse the location of the saddle slot, which I have not routed yet) I s…