The Hub

The latest builds, repairs, and conversations from across Looth. Activity
Filters AND Search Electric Builds× In Perspective× In Suggestions× In Market Place× In New Builds× Reset all
Private member DiscussionElectric Builds

Set-neck pocket and angle questions

Hi Everyone, I’m working through building my first set neck electric, an LP Jr. I had some build questions… - if you’ve built these Gibson style set necks before, did you cut the neck pocket straight and angle the heel of the neck? Or did you cut the pocket at the angle and keep the bottom of the heel straight? I’m attempting to cut the pocket at an angle, and it isn’t the easiest thing to do, I’m finding out. First, I’ve had some moveme…

1 reply
1 reply
LikeShare
Private member
Hi Joe, I would recommend putting the taper in the neck pocket, not the neck. Maybe you need thinner shims to solve your router depth issue. I would glue the fingerboard onto the neck and have that as…
Private member DiscussionFinish New Builds

Finishing Zircote

Hi Everyone. I am planning to finish my latest electric build which has a Zircote top. I am going to spray Nitro Lacquer. Is there anything I need to watch out for in spraying over such an oily wood? Thanks!

2 replies
2 replies
LikeShare
Private member
Hi Robert: Nothing special to do with Ziricote. You should wipe it down with mineral spirits or naptha and then a light coat of thinned finish or sanding sealer is all that is needed before you start…
Load older activity