The Hub

Hey folks! I picked up a neck relief gauge from Doug in one of the earlier batches, maybe the introductory run? Some of the small feet caps that thread onto the moving legs of the tool have cracked, broken, or become worn down. I contacted StewMac about purchasing replacement parts, but they don't sell subparts for the relief gauge and otherwise won't help me. They appear 3D printed, so I was wondering if anyone with the means to print s…

Great Tool. Great Benchy. Testing Threads, Sliding Dovetails, Overhangs, and it’s actually useful instead of that boat.. so testing wear resistance too. igus iglidur I151 Thanks for the model @member

Hey everyone, I wanted to do a bit of a follow up on a repair I'm doing. A customer brought in a Seagull acoustic guitar that had been dropped, causing the heel block to separate. I managed to get that glued back together with pleasing results, however I did need to take the neck off by removing the two bolts which thread into the heel block, and unglued the fretboard extension. All went well here, although I'm left with a situation whe…

i have a 2010 g&l asat bluesboy with a loose barrel jack. which is to say, when a cable is gently unplugged the jack comes out of the body. there is no nut on the inside of the control cavity to hold the jack in place - it looks like the wood itself is threaded. the jack barely protrudes into the control cavity so i don’t see an obviously good way to get a washer and nut on it. any ideas outside of enlarging the hole and installing a jac…

Hey! So I've got a customer who has dropped off with me one of the nastier headstock breaks I've seen in recent memory. There is excess glue of some sort (rock hard, clear) all inside the break, along with the threaded tracks of the screws. I'd usually just recommend a replacement neck in this case, but the customer is desperate to keep this neck as it holds some sentimental value to him. He's aware the repair will not be invisible, how…

Hello, Help needed please! 🙏 It’s a Washburn g10v that I am trying to source parts for. The owner wants to do a full restore but we can’t move forward with the job as the trem is missing the micro tuner thumb nuts. The trem is a big old rare thing with 2001 on the edge of it. Please see picture for reference. (Taken from reditt, a common problem it looks like) I have one of the thumb nuts here and I think it’s a #no.5 -44 UNF thread. But it’s…